Panasonic CQ-RG131W User Manual

21

Power Supply

: DC 12 V (11 V - 16 V), Test Voltage 14.4 V, Negative Ground

Tone Controls

: Bass; ±12 dB at 100 Hz

Treble; ±12 dB at 10 kHz

Current Consumption

: Less than 2.5 A (Tape mode, 0.5 W 4-Speaker)

Maximum Power Output

: 40 W x 4 (at 4 

Ω

)

Power Output

: 20 W x 4 (DIN45 324, at 4 

Ω

)

Speaker Impedance

: 4 

Ω

(4 - 8 

Ω

acceptable)

Dimensions (Main unit)

: 178(W) x 50(H) x 150(D) mm

Weight (Main unit)

: 1.6 k

g

Frequency Range

: 87.5 - 108 MHz

Usable Sensitivity

: 6 dB/µV (S/N 30 dB)

Stereo Separation

: 35 dB (at 1 kHz)

Frequency Range

: 531 - 1602 kHz

Usable Sensitivity

: 28 dB/µV (S/N 20 dB)

Reproduction System

: 4-track, 2-program stereo

Tape Speed

: 4.76 cm/sec.

FF/REW Time

: Less than 200 sec. (C-60)

Frequency Response

: 35 - 14000 Hz

Wow and Flutter

: 0.12 % (WRMS)

Signal to Noise Ratio

: 52 dB

Note:  Specifications and the design are subject to possible modification without notice due to
improvements.

Be sure to use a fuse of the specified rating (12 A) when replacing a blown fuse. Fuses with higher
capacity ratings, use of any substitute, or connection without a fuse may result in a fire hazard or
damage to the unit. If the replacement fuse fails, consult your nearest authorized Panasonic Service
Center.

To clean the exterior of this unit, use a soft cloth to wipe the surface. Do not use benzine, thinner or
any other type of solvents.