Panasonic cy-tup153n User Manual

20

21

. 

Attach the seal side of the Velcro Tape 

 to the unit, then 

mount the unit on the carpet. 

. (Recommended)

 Never mount the unit in any of the following locations to avoid damage due to overheating;
  • Near the heater port. 
  • Places like the dashboard or rear deck, where it may be exposed to direct sunlight. 
 Do not mount the unit near the door, where it could be exposed to rain. 
 You run the risk of interfering with the mounting or causing damage by drilling into the gas tank, a wiring harness, or 

other component.

Note:
 Apply an anticorrosive to the holes and tapping screws.
 Keep a safe distance between the unit and other electronic equipment.

Note:
 Some carpet materials may not be suitable for this 

mounting method. In this case, please contact your 
nearest Panasonic Service Centre for installation. 

The parking brake (side brake) switch position varies with the car 
model. For details on the exact location of the parking brake (side brake) 
switch in your car, contact your dealer.

Parking Brake (Side Brake) Connection 
Lead
(Bright green)
When the parking brake (side brake) lever 
is engaged, the unit is grounded by the 
chassis.

Parking Brake (Side Brake) 
Connection Lead
(Bright green)

Parking brake (side brake) 
switch

Brake light

Battery

Car chassis

Come up to this point.

Power source side lead



 Attach a Clip Connector 

 to the end of the parking  

brake (side brake) connection lead. 



 The Clip Connector 

 is connected to the power 

source side lead of the parking brake (side brake) 
lever.

 Clip connector

 For safety, be sure to ask your nearest professional 

installer to do this connection. 

19

20

 Velcro Tape

 Tapping Screw

 Tapping Screw