Panasonic cy-tup153n User Manual

Page of 18
16
English
CY-TUP153N
17
English
CY-TUP153N
15
16
Power
Turn your car’s ignition key to the ACC or ON position.
ON:  
Press [PWR] (Power).
OFF:  Press [PWR] (Power) again. 
Note:
 When changing the source to TV tuner on Head Unit 
(CQ-VD7003N, CQ-VD6503N, option), the power is 
turned on automatically. 
Band Selection
Press [BAND]
TV1  
TV2
Note:
 TV2 is provided to allow more preset channels in 
memory.
Channel Selection
Press [
] (CH DOWN) or [] (CH UP)
[
] (CH UP): Higher channel number 
[
] (CH DOWN): Lower channel number
Press and hold [
] (CH DOWN) or [] (CH UP) for more 
than 0.5 seconds. Seeking will start. 
TV Channel Display
Press [ENT] (ENTER)
Press [ENT] (ENTER) again to display off. 
Example: When preset channel is not set.
Basic TV Operation
 Up to 12 channels can be stored in each of the TV1 and 
TV2 band selections. 
 TV2 is provided to allow more preset channels in 
memory. Channels that could not be placed in memory 
on the Band TV1 can be placed on the Band TV2.
 If Band TV1 is suffi cient to hold all desired channels, 
they should usually be preset to that band.
Note:
 New channels overwrite existing saved stations after 
these procedures. 
Auto Preset Channel Memory
With this operation, channels with good receiving 
conditions can be automatically stored in the preset 
memory. 
 Press [BAND] to select the TV band. 
 Press and hold [BAND] for more than 2 seconds. 
 
12 channels with fi rst to 12th highest in signal 
strength will be preset to each band. (They are listed in 
order, from the earliest channel number.)
Preset Channel Calling
 Press [BAND] to select the TV band. 
 Press [
or [] (PRESET)
      Warning  
 To ensure safety, never attempt to preset channels 
while you are driving. 
Note:
 Only English is displayed on the OSD screen.
 Background of the display becomes blue when the unit 
cannot get a good reception on the TV.
[ENT] (ENTER)
[PWR] (Power) 
[BAND]
[
] (CH DOWN)
[
] (CH UP)
TV band
Selected TV channel number
Selected preset channel number
Channel Preset
[
] [
(PRESET)
[MENU] 
Writing Preset Channel (PRESET 
WRITE)
Favorite channels can be written after you have set the 
preset channel once.
Example: 
The 25 channel is written in the TV1 preset channel list.
 Press and hold [
] (PRESET) for more than 2 
seconds. 
 
Preset channel writing mode display appears. 
 Press [
] (CH DOWN) or [] (CH UP) to select  
channel you want to write. 
 Press [ENT] (ENTER) or [BAND] to set.  
 Press [MENU] to exit the preset channel writing mode.  
Deleting Preset Channel (PRESET 
DELETE)
Channels can also be deleted from the presets when no 
longer required.
Example: 
The 30 channel is deleted in the TV1 preset channel list.  
 Press and hold [
] (PRESET) for more than 2 
seconds.  
 
Preset channel deleting mode display appears and 
preset 1 channel is received. 
 Press [
or [] (PRESET) to select preset channel 
you want to delete. 
TV channel you want to write
 Press [ENT] (ENTER) or [BAND] to set.  
 Press [MENU] to exit the preset channel deleting 
mode. 
Preset channel you want to delete
Refer to the CQ-VD7003N and CQ-VD6503N 
instruction manuals for information on TV operation 
on the CQ-VD7003N and CQ-VD6503N touch panel 
and remote control.