Panasonic cq-dpx172u User Manual
26
CQ-DPX172U
17
E
N
G
L
I
S
H
Motor Antenna
Connect the car motor antenna lead to the blue motor
antenna relay control lead.
(Do not confuse the antenna lead with blue/white stripe
lead for a power amplifier.)
Connect the car motor antenna lead to the blue motor
antenna relay control lead.
(Do not confuse the antenna lead with blue/white stripe
lead for a power amplifier.)
Battery
Connect the yellow battery lead to the correct radio wire or
to the battery fuse port on the fuse block.
Connect the yellow battery lead to the correct radio wire or
to the battery fuse port on the fuse block.
Antenna
Connect the antenna by plugging the antenna lead into the
antenna receptacle.
Connect the antenna by plugging the antenna lead into the
antenna receptacle.
Equipment
Connect any optional equipment such as an amplifier,
according to the instructions provided with the
equipment. Leave about 12” (30 cm) of distance between
the speaker leads/amplifier unit and the antenna/antenna
extension cord. Read the operating and installation
instructions of any equipment you will connect to this unit.
Connect any optional equipment such as an amplifier,
according to the instructions provided with the
equipment. Leave about 12” (30 cm) of distance between
the speaker leads/amplifier unit and the antenna/antenna
extension cord. Read the operating and installation
instructions of any equipment you will connect to this unit.
Power
Connect the red power lead to the correct car radio wire or
to the appropriate fuse port on the fuse block.
If the stereo unit functions properly with all these
connections made, disconnect the wires and proceed to
the final installation.
Connect the red power lead to the correct car radio wire or
to the appropriate fuse port on the fuse block.
If the stereo unit functions properly with all these
connections made, disconnect the wires and proceed to
the final installation.
❏ Final Installation
Lead Connections
Connect all wires, making sure that each connection is
insulated and secure. Bundle all loose wires and fasten
them with tape so they will not fall down later. Now insert
the stereo unit into the mounting collar.
Connect all wires, making sure that each connection is
insulated and secure. Bundle all loose wires and fasten
them with tape so they will not fall down later. Now insert
the stereo unit into the mounting collar.
Congratulations! After making a few final checks, you’re
ready to enjoy your new auto stereo system.
ready to enjoy your new auto stereo system.
❏ Final Checks
1. Make sure that all wires are properly connected and
insulated.
2. Make sure that the stereo unit is securely held in the
mounting collar.
3. Turn on the ignition to check the unit for proper
operation.
If you have difficulties, consult your nearest authorized
professional installer for assistance.
professional installer for assistance.
❏ Preparation
Installation Guide
(continued)
Less than 30°
¡We strongly recommend that you wear gloves for
installation work to protect yourself from injuries.
¡When bending the mounting tabs of the mounting
collar with a screwdriver, be careful not to injure your
hands and fingers.
hands and fingers.
¡Disconnect the cable from the negative
battery
terminal (see caution below).
¡Unit should be installed in a horizontal position with the
front end up at a convenient angle, but not more than
30°.
30°.
Caution: Do not disconnect the battery terminals of a
car with trip or navigational computer since all user
settings stored in memory will be lost. Instead take
extra care with installing the unit to prevent shorts.
car with trip or navigational computer since all user
settings stored in memory will be lost. Instead take
extra care with installing the unit to prevent shorts.
Dashboard Installation
Installation Opening
7
5
/
32
”
(182 mm)
2
3
/
32
”
(53 mm)
This unit can be installed in any dashboard having an
opening as shown above. The dashboard should be
opening as shown above. The dashboard should be
3
/
16
”
(4.75 mm) –
7
/
32
” (5.56 mm) thick in order to be able to
support the unit.