Panasonic cq-mr707n User Manual

This unit is equipped with a removable face plate. Removing
this face plate makes the radio totally inoperable.

q Switch off the power of the unit.

w Remove the removable face plate. (

a

Page 22)

e Gently press the bottom of the case and open the cover.

Place the face plate into the case and take it with you
when you leave the car.

q Fit the face plate with its right or left hole on one of the

pins provided on the main unit.

w Fit the other hole on the other pin applying slight pres-

sure.

e Move the face plate up and down a few times to make

sure it is secure.  Then close the front panel and press
down the right side of the face plate until it clicks into
place.

The security indicator blinks when the removable face plate
is removed from the unit.

q Press and hold [SEL] to change to display control

mode. (“PATTERN” is displayed.) (

a

Page 8)

w Press [SEL].  “LED ON” or “LED OFF” is displayed.

e Press [}TUNE] or [{TUNE] to turn the security

indicator on or off. (LED ON or OFF)

r The security indicator blinks when the removable face

plate is removed.

This alarm sounds to warn you not to forget to remove the
panel before leaving your car.  This function is activated
when the security indicator is on.

REMO

TE

Cautions:
¡This face plate is not water-proof. Do not expose it to water or excessive moisture.
¡Do not remove the face plate while driving your car.
¡Do not place the face plate on the dashboard or nearby areas where the temperature rises to high levels.

23

r Removable Face Plate Case

MOS FET 45Wx4 MD RECEIVER WITH CHANGER CONTROL 

super bright display with Level Meters

E

E

REMOT

E

CQ-MR707N

Panel Removal

Alarm

Display

Security

Indicator

Blinks

OFF

ON

OFF