Panasonic cq-va7800n User Manual

25

24

[1] - [6] (Preset)

Note: The stereo
indicator lights during 
reception of an FM
stereo broadcast.

FM1

FM2

FM3

AM

Up to 6 stations each can be saved in the FM1, FM2, FM3 and AM preset station memories.

Manually save a station in the
preset memory.

Select a band and frequency. (step 

w and e on the previous page)

Press and hold [1] to [6] for more than 2 seconds.

The frequency blinks once, and
a receiving station is saved in
the memory.

Automatically save stations with
good reception in the preset
memory.

¡

The 6 stations with good reception will be automatically saved in the
memory under preset numbers 1 to 6.

¡

Once set, the preset stations are sequentially scanned for 5 seconds
each.

¡

To stop the scanning, press [1] to [6].

Select a band. (step 

w on the previous page)

Press and hold [ENTER] for more than 2 seconds. 

Select a band. (step 

w on the previous page)

Press [1] to [6].

Note: You can call up preset stations 1 to 6 by pressing [{] and [}]
as well.

Note: New stations overwrite existing saved stations after following this procedure.

[] ] [[ ] (Tune)
[}] [{] (Preset)
[ENTER]

[]][[]

Preset memory 

Band

Preset number

“Sub-LCD Display Change” (

a

page 44)

Frequency

Mode display

Band/frequency

FM stereo indicator
lights during reception
of an FM stereo
broadcast.

[] ] [[ ] (Tune)
[}] [{] (Preset)

2

3

1

[[]: Higher frequency
[]]: Lower frequency

Press and hold for more than 0.5 seconds then
release.
[[]: Higher frequency
[]]: Lower frequency
Tuning will automatically stop when the signal of
the next broadcast station is received.

Press [ENTER] to change the band.

Press [MODE] to change to the AM/FM
(LW/MW) mode.