Panasonic cs-c12dku User Manual
8.3. Automatic Operation
•
Automatic operation can be set using remote control.
•
This operation starts to operate with indoor fan at SLo speed for 20 seconds to judge the intake air temperature.
•
After judged the temperature, the operation mode is determined by referring to the below standard.
•
Then, the unit start to operate at determined operation mode, until it is switched off using remote control, with the setting
temperature as shown in below table.
temperature as shown in below table.
•
The setting temperature for all the operations can be changed one level up or one level down from the standard temperature
as shown in below table by pressing on the temperature up or temperature down button at remote control.
as shown in below table by pressing on the temperature up or temperature down button at remote control.
•
The operation mode judging temperature and standard setting temperature can be increased by 3.6°F permanently, by open
the circuit of JX1 at indoor electronic controller.
the circuit of JX1 at indoor electronic controller.
17
CS-C9DKU CU-C9DKU / CS-C12DKU CU-C12DKU