Panasonic cs-mke12nku User Manual
Emergency operation
SENSOR DRY
Auto Initial Operation Mode Selection
Selecting the operation mode
During DRY operation, the system adjusts the room
temperature and fan speed according to the conditions in the
room, in order to maintain a comfortable room environment.
room, in order to maintain a comfortable room environment.
SENSOR DRY operation
DRY operation is as shown in the figure below.
PAM- control
In order to further improve inverter performance, control is
switched between PWM control at low operation speeds, and
PAM control at high operation speeds, making the most
effective use of power.
PAM control at high operation speeds, making the most
effective use of power.
The compressor operation frequency varies.
The indoor fan operates with 1/f fluctuation.
The indoor fan operates with 1/f fluctuation.
The compressor operates at a low operating frequency.
The indoor fan operates with 1/f fluctuation.
The indoor fan operates with 1/f fluctuation.
Monitoring operation takes place when the room temperature
is below 59°F
(
15°C), or more than 5°F
(
3°C) below the set
temperature.
When the monitoring range is entered, the compressor stops,
and the indoor fan operates with 1/f fluctuation.
DRY A
DRY B
Monitor
Conditions are monitored at all
times when the room temperature
is below 59
times when the room temperature
is below 59
°
F(15
°
C).
Load
COOL zone
A zone
B zone
Emergency operation is available when the remote
controller malfunctions, has been lost, or otherwise
cannot be used.
cannot be used.
The set temperature is 4°F(2°C) below the detected room
temperature in the case of cooling operation, and 4°F(2°C)
above the room temperature in the case of heating
operation. The flap and fan speed settings are AUTO.
above the room temperature in the case of heating
operation. The flap and fan speed settings are AUTO.
(GREEN) (RED)
(Lamp
Off)
COOL
HEAT
STOP
When AUTO mode is selected, the microprocessor calculates
the difference between the set temperature and the room
temperature, and automatically switches to Cooling or Heating
mode.
temperature, and automatically switches to Cooling or Heating
mode.
Once the mode is selected based on this function, the unit will
continuously operate at the same mode as initially selected.
continuously operate at the same mode as initially selected.
Room temp. Set temp. COOL
Room temp. Set temp. HEAT
Room temp. Set temp. HEAT
To operate the system, press the OPERATION button,
which is also used as the receiver, below the unit display.
Each time this button is pressed, the OPERATION lamp
changes color to indicate the type of operation. Select the
desired type of operation.
desired type of operation.
7. FUNCTIONS
7-1. Operation Functions
When multiple indoor units are used and units in other rooms are
already operating, they will be set to the same mode of operation
as the operating indoor units.
already operating, they will be set to the same mode of operation
as the operating indoor units.
NOTE
32