Panasonic dmr-es45v User Manual

≥ Underlined items are the factory default settings. 

∫ Display 
Status Messages 

Choose whether to show status messages automatically or not.

[Automatic]

[Off]

Choose the language for these menus and the on-screen 
messages.

[English]

[Español]

[Français]

Select whether to show the blue background, normally shown when 
TV reception is poor.

[On]

[Off]

Changes the brightness of the unit’s display.

[Bright]

[Dim]

[Automatic]

∫ TV Screen 

Choose the setting to suit your TV and preference. 

[Aspect 4:3 & 480i]

[Aspect 4:3 & 480p]

[Aspect 16:9 & 480i]

[Aspect 16:9 & 480p]

Press [ENTER] to show the following settings.

[On]

[Off]

You can only select items compatible with the connected 
equipment. This setting normally does not need to be changed. 
However if you are concerned about output picture quality, it may 
be improved by changing the setting.

[Auto]

[480p]

[720p]

[1080i]

Settings used when 4:3 aspect video is output on the television as 
16:9 aspect.
(Only effective when 720p or 1080i is selected as the output 
resolution)

[Full]

[Normal]

Effective when connected to a device that only supports RGB 
output.

[Standard]

[Enhanced]

[On]

[Off]

You can set the unit to output the best possible sound for your 
speakers.

[Auto]

[Multi Channel]

[2 Channel]

Displayed when “Multi Channel” is selected in “HDMI Connection 
Speakers Setting”
You can adjust the settings for speaker size, presence and audio-
delay. (

[On]

[Off]

You can select how to display the image on the TV when you watch 
16:9 images (DVD-Video) on a 4:3 standard aspect TV. (

[Pan and Scan (Stretch to fit)]

[Letterbox (Shrink to fit)]

You can select how to display the image on the TV when you watch 
16:9 images (DVD-RAM) on a 4:3 standard aspect TV. (

[4:3 Aspect]

[Pan and Scan (Stretch to fit)]

[Letterbox (Shrink to fit)]

∫ VHS 
Select Tape Length

Set the length of tape you are using so the unit can show the correct 
remaining time.

[T120]

[T160]

[T180]

Set the speed for Jet Search when playing EP and VP tapes.
≥It is possible to view the picture recorded in EP or VP mode at 

approx. 27 or 35 times speed.

[

k27] [k35]

≥Select [k27] if the picture is poor at [k35].

The display turns dark during play, and reappears 
momentarily if a button is pressed. When the unit is 
turned off, the unit’s display disappears. While using 
this mode the standby power consumption can be 
reduced.

Video is output from COMPONENT VIDEO OUT 
terminal.

Automatically selects the output resolution best suited 
to the connected television (1080i, 720p or 480p).

Video output is enlarged to match the screen size.

Video is output as 4:3 aspect. Side panels (black bars 
on the left and right) will appear on the screen.

When the black and white images are not distinct.

Audio is output from an amplifier when using the 
DIGITAL AUDIO OUTPUT terminal.

When using the speaker settings of the connected 
equipment

When using three or more speakers with equipment 
that cannot set the speaker settings

When using two speakers

When “On” is selected, you can operate other “Ctrl 
with HDMI” compatible devices using the “Ctrl with 
HDMI”.

Video recorded for a widescreen is played with 
the sides cut off if Pan & Scan was specified.
If 16:9 software prohibits Pan & Scan, the 
image will appear in the letterbox style (with 
black bands above and below the picture) 
despite the setting here. 

Video recorded for a widescreen is played in 
the letterbox style. 

Titles are played as recorded. 

Video recorded for a widescreen is played with 
the sides cut off.

Video recorded for a widescreen is played in 
the letterbox style. 

T30, T60, T90 and T120 tapes

T140 and T160 tapes

T180 tapes

M6VP&PC.book  65 ページ  ２００６年２月６日　月曜日　午後３時２９分