Panasonic cydab2000n User Manual

30

Attach the seal side of the Velcro Tape to
the DAB tuner unit, then mount the unit on
the carpet.

Cautions:
8 We strongly recommend you to wear gloves for installation work to protect yourself from injuries.
8 Never mount the DAB tuner unit in any of the following locations to avoid damage due to overheating;

1. Near the heater port.
2. Places like the dashboard or rear deck, where it may be exposed to direct sunlight.

8 Do not mount the DAB tuner unit near the door, where it could be exposed to rain.

Note: Some carpet materials may not
be suitable for this mounting method. In
this case, please contact your nearest
authorized Panasonic Service Center for
service.

1. Choose a place to mount the DAB tuner

unit, and drill four holes 3.5 mm in diame-
ter in the car body.

2. Make cross-cuts at the corresponding

points in the carpet using a knife.

3. Tighten the tapping screws with washer.

Note: Apply an anticorrosive to the
holes and tapping screws.

DAB Tuner Unit

e Velcro tape

Carpet

r Tapping Screw with Washer

Carpet

DAB Tuner Unit

Drill 3.5 mm diameter holes to the chassis.

Caution: You run the risk of interfering with the mount-

ing or causing damage by drilling into the gas tank, a
wiring harness, or other component.