Panasonic cydab2000n User Manual

36

Buttons are invalid for
operation.

Battery is empty.

Remote control is pointing in
the wrong direction.

Battery polarity (+) (–) is
reversed.

Replace the battery.

Direct the remote control at REMOTE (sensor) on
the head unit’s panel.

Insert the battery correctly.

Wrong battery

Check the battery.

DAB cannot be
received.

Check and take steps as described in the tables below.

Immediately switch the power off.
Disconnect the power cable and check that there is nei-
ther smoke nor heat from the unit before asking for
repairs. Never try to repair the unit yourself because it is
dangerous to do so.

Caution:
Do not use the unit in case of a
malfunction.
Do not use the unit in a irregular
condition, for example, without
sound, or with smoke or foul
smell, as this can cause a fire or
an electric shock. Immediately
stop using it and call the store
where you purchased it.

■ Remote Control

Outside of reception area

Wiring is wrong.

Set the tuner unit for linkage to RDS station.

Correctly connect the cables as shown in Electrical
Connections.

Fuse is burnt.

Call the store where you purchased the unit, or
your nearest service station (see attached sheet)
and ask for fuse replacement.

■ Tuner

DAB indicator does
not light.

DAB tuner is connected to
CHANGER 1 on dual CD
changer selector.

Connect DIN cord to CHANGER 2 on the dual CD
changer selector.

Noise in audio

DAB signals are too weak.

Set the tuner unit for linkage to RDS station.

No sound

Supplied DIN cord is con-
nected to AUX-IN.

Connect the supplied DIN cord to CD changer
input cord.

Switched to a differ-
ent program

DAB link level 1 is selected.

Select DAB link level 2.

Antenna sensitivity is too
low.

Preset station is reset

Battery cable is not correctly
connected.

Connect the battery cable to the terminal that is
always live.

Check the antenna if it is correctly installed.