Panasonic DMCZS10K User Manual
42
VQT3G90
VQT3G90
43
Using the [Setup] menu
For details about the setting procedure in the [Setup] menu (
Item
Settings, notes
[Clock Set]
(
Set time, date, and display format.
[Auto Clock Set]
Setting the clock
automatically using GPS.
(
automatically using GPS.
(
[ON]/[OFF]
[World Time]
Set the local time at
travel destination. (
travel destination. (
[Destination]: Set the local time at travel destination.
[Home]: Set date and time at home area.
[Travel Date]
Record the number of
days elapsed in your
travels. (
days elapsed in your
travels. (
[Travel Setup]
[SET] (Register departure and return dates)/[OFF]
[SET] (Register departure and return dates)/[OFF]
[Location]
[SET] (Input name of location)/[OFF]
[SET] (Input name of location)/[OFF]
[Beep]
Change or mute the
beep/shutter sounds.
beep/shutter sounds.
[Beep Level]
/
/
: Low/High/Mute
[Beep Tone]
/
/
: Change beep tone.
[Shutter Vol.]
/
/
: Low/High/Mute
[Shutter Tone]
/
/
: Change shutter tone.
[Clock Set], [Economy] and [Auto Review] are important for clock setting and
battery life. Please check these before use.
battery life. Please check these before use.
Item
Settings, notes
[Volume]
Adjust volume of sound
from speakers (7 levels).
from speakers (7 levels).
[0] / [1] / [2] / [3] / [4] / [5] / [6]
• Cannot be used to adjust TV speaker volume when
connected to TV.
[Cust.Set Mem.]
Register settings on
current camera. (
current camera. (
[C1] / [C2] / [C3]
[LCD Mode]
Make LCD monitor easier
to see.
to see.
[Auto Power LCD]:
The brightness is adjusted automatically depending on
how bright it is around the camera.
how bright it is around the camera.
[Power LCD]:
Makes screen brighter than normal (for outdoor use).
[OFF]
• [Auto Power LCD] does not work in Playback Mode.
• [Power LCD] returns to ordinary brightness if there is no
operation for 30 seconds when recording. (Press any
button to make brighter again.)
button to make brighter again.)
• Because the picture shown on the LCD monitor screen
emphasizes brightness, some subjects may look different
than their actual appearance, but this will not affect the
recorded picture.
than their actual appearance, but this will not affect the
recorded picture.
• Setting [LCD Mode] will reduce the number of pictures
that can be recorded and recording time.
[Guide Line]
Select recording
information display and
types of guidelines.
information display and
types of guidelines.
[Rec. Info.]
[ON] (Display recording information with guide lines.)
[OFF]
[OFF]
[Pattern]
/
: Change the patterns of guide lines.
• When [Intelligent Auto] Mode has been selected, only
is displayed. Also recording information and guidelines
cannot be displayed simultaneously.
cannot be displayed simultaneously.