Panasonic DMCZS10K User Manual
68
VQT3G90
VQT3G90
69
Taking pictures according to the scene
[Scene Mode]
(Continued)
Recording Mode:
Recording 3D still pictures
[3D Photo Mode]
Recording Mode:
[Photo Frame]
A frame is superimposed over the image.
Use cursor button to select the frame, and then press [MENU/SET].
Notes
• The recording pixel level is 2 M (
).
• Guide lines cannot be displayed.
[Underwater]
Achieve natural colors under water.
Tips
• For fast moving subjects, align with the AF area and press
◄ (AF Lock).
(Press
◄ again to release.)
[AF Lock]
(focus fixed)
AF area
• If the zoom is operated after AF Lock is set, the AF Lock setting will be
canceled and must be set again.
• AF Lock cannot be set if [AF Mode] is set to
.
• Adjust the coloring with “White Balance fine adjustment” (
Notes
• Always use marine case (optional).
• Positioning is not possible underwater, because the GPS signals cannot reach
the camera.
[High Speed
Movie]
Movie]
Records rapid movements at a high speed of 220 fps.
Press the motion picture button to start recording
Press the motion picture button again to finish recording
Press the motion picture button again to finish recording
• Motion picture recording can also be started or finished by pressing the
shutter button.
• During playback, the movements of a subject that cannot be seen by the
naked eye can be made recognizable by playing back the motion pictures
using slow motion.
using slow motion.
Notes
• High-speed motion pictures cannot be recorded in the built-in memory.
• They are recorded in [QVGA] of [Motion JPEG] motion pictures. (up to 2 GB,
about 7 minutes 20 seconds at one recording.)
• No sound is recorded.
• Still pictures cannot be recorded while high-speed motion pictures are being
recorded.
• The settings for the focus, zoom, exposure and White Balance are fixed to the
settings specified when recording was started.
• The Optical Image Stabilizer does not work.
• The [AF Mode] is set to
(1-area-focusing).
• Flickering or horizontal stripes may appear while recording under fluorescent
lighting.
The camera continuously records multiple still pictures while being moved horizontally,
and combines them into a 3D still picture. (The pictures are played back on the camera
as 2D still pictures.)
To view 3D still pictures, you need a 3D-capable TV. For details on how to play back 3D
still pictures (
and combines them into a 3D still picture. (The pictures are played back on the camera
as 2D still pictures.)
To view 3D still pictures, you need a 3D-capable TV. For details on how to play back 3D
still pictures (
Set mode dial to
• The instructions on how to record pictures is displayed.
Record a picture so that the
subject comes on the right side
of the center
subject comes on the right side
of the center
Slide this camera horizontally
level from left to right while
recording
level from left to right while
recording
• A guide is displayed while recording.
• By using the guide as a reference, slide the
camera by approximately 10 cm (0.33 feet)
in about 4 seconds.
in about 4 seconds.
Tips for recording pictures
• Record a stationary subject.
• Record a picture outdoors or in other bright locations.
• Press the shutter button halfway to fix the focus and the exposure, press the shutter
button fully, and then slide the camera.
●
3D still pictures cannot be recorded by holding this camera vertically.
●
3D still pictures are recorded in MPO format (3D).
●
The zoom position is fixed to the W end.
●
The picture size is fixed to 2M
.
●
ISO Sensitivity is automatically adjusted. However, ISO Sensitivity is increased to
increase the shutter speed.
increase the shutter speed.
●
Motion pictures cannot be recorded.
●
When any of the recording conditions as listed below exists, the 3D effect may not be
available even if a picture is recorded in 3D, or image may be distorted:
available even if a picture is recorded in 3D, or image may be distorted:
• When the subject is too dark or its brightness changes
• When the subject is moving
• When pictures are recorded under water