Panasonic DMCZS10K User Manual
78
VQT3G90
VQT3G90
79
Recording the place of recording with GPS
(Continued)
Recording Mode:
For [GPS] menu setting procedures (
Changing the recorded place name information
If there are other candidate locations for the positioning results, you can change the
information to nearby place names or landmarks.
information to nearby place names or landmarks.
• When other place name information can be selected,
appears in front of the place
name information.
Select [GPS Area Select] from the [GPS] menu
Use cursor button to select the item to change and press
[MENU/SET]
[MENU/SET]
Use cursor button to select the place name or landmark from
the displayed candidates, and then press [MENU/SET]
the displayed candidates, and then press [MENU/SET]
■
If you do not wish to record place names and landmarks
In step
, select [Delete all place-names] and place names and landmarks will not be
recorded.
Or, in step
Or, in step
, if you select [Yes] when a message asking whether to delete place
names and landmarks lower than the selected place name, information of the place
name will not be recorded (e.g., [City/Town/Village] and [Landmark] when [County/
Township] is deleted).
name will not be recorded (e.g., [City/Town/Village] and [Landmark] when [County/
Township] is deleted).
• However, longitude and latitude will be recorded. If you do not wish to record them,
turn [GPS Setting] to [OFF].
• To return place names and landmarks set to not be recorded to the original setting
(i.e., to record the place names and landmarks), perform [GPS Area Select] again.
●
In large public parks or similar locations, landmarks may not be displayed, or
incorrect landmarks may be displayed. If you cannot select the desired landmark in
[GPS Area Select], perform [My Landmark] (
incorrect landmarks may be displayed. If you cannot select the desired landmark in
[GPS Area Select], perform [My Landmark] (
Edit] (
Executing positioning immediately and updating your current location
If there is a discrepancy in the displayed information such as the location name or if
positioning has failed, move to a place where the signals from the GPS satellite can be
received more easily, and update the positioning.
positioning has failed, move to a place where the signals from the GPS satellite can be
received more easily, and update the positioning.
Select [Repositioning] from the [GPS] menu
Positioning starts.
The GPS status indicator lights during positioning.
The GPS status indicator lights during positioning.
GPS status indicator
• When you select [GPS] or
in the [GPS Setting] displayed in the Quick menu
(
■
Concerning the positioning intervals
Even if you do not manually update positioning, positioning is attempted automatically
immediately after the power has been turned on and at a fixed intervals after that
unless [GPS Setting] is [OFF].
When [GPS Setting] is [ON], positioning is tried at fixed time intervals even when the
power is off.
However, positioning is canceled under the following conditions.
immediately after the power has been turned on and at a fixed intervals after that
unless [GPS Setting] is [OFF].
When [GPS Setting] is [ON], positioning is tried at fixed time intervals even when the
power is off.
However, positioning is canceled under the following conditions.
• When the battery power is low and
has appeared.
• When the power has not been turned on for a certain length of time.
■
To display the GPS reception status
Select [GPS Setting] from the [GPS] menu.
Use the cursor button to select [INFO] and press [MENU/SET].
Use the cursor button to select [INFO] and press [MENU/SET].
• You can start positioning by pressing [MENU/SET] again.
●
GPS reception status display
: Received GPS time
: Number of GPS satellite signals received
: Latitude
: Number of GPS satellite signals received
: Latitude
Longitude