Panasonic DMCZS10K User Manual
84
VQT3G90
VQT3G90
85
Using the [Rec] menu
Entering Text
For [Rec] menu setting procedures (
[Aspect Ratio]
Aspect ratio of still picture can be changed according to printing or playback format.
■
Recording Mode:
■
Settings:
/
/
/
●
Edges may be cut off when printing – be sure to check in advance.
[Picture Size]
Set the size (number of pixels) of still pictures. Number of pictures which can be recorded
depends on this setting and on [Quality].
depends on this setting and on [Quality].
■
Recording Mode:
■
Settings:
Picture Size ([Aspect Ratio]:
)
14 M
10 M
∗
7 M
∗
5 M
3 M
∗
0.3 M
4320×3240
3648×2736
3072×2304
2560×1920
2048×1536
640×480
Picture Size ([Aspect Ratio]:
)
12.5 M
9 M
∗
6 M
∗
4.5 M
∗
2.5 M
∗
0.3 M
∗
4320×2880
3648×2432
3072×2048
2560×1712
2048×1360
640×424
Picture Size ([Aspect Ratio]:
)
10.5 M
7.5 M
∗
5.5 M
∗
3.5 M
∗
2 M
∗
0.2 M
∗
4320×2432
3648×2056
3072×1728
2560×1440
1920×1080
640×360
Picture Size ([Aspect Ratio]:
)
10.5 M
7.5 M
∗
5.5 M
∗
3.5 M
∗
2.5 M
∗
0.2 M
∗
3232×3232
2736×2736
2304×2304
1920×1920
1536×1536
480×480
∗ This setting is not available in ([Intelligent Auto] Mode).
●
Mosaic effect may appear depending on subject and recording conditions.
Setting guide
Larger picture size
Smaller picture size
Crisper picture
Coarser picture
Lower recording
capacity
Higher recording
capacity
Use the cursor button to enter names with the Face Recognition function and in Scene
Modes [Baby] and [Pet], or to register locations in [Travel Date] etc.
Modes [Baby] and [Pet], or to register locations in [Travel Date] etc.
Use cursor button to select characters
Press [MENU/SET] several times until the desired character is
displayed
displayed
Cursor position
Text is inserted at the cursor position.
• To change the character type
→ Select
, and press [MENU/SET].
■
Editing text
Use cursor button to move the cursor to text to edit.
• You can also use the zoom lever to reposition the cursor.
Use cursor button to select [Delete], and then press [MENU/SET].
Use cursor button to select the correct text, and then press [MENU/SET].
Use cursor button to select the correct text, and then press [MENU/SET].
When you are finished entering text, use cursor button to
select [Set] and press [MENU/SET]
select [Set] and press [MENU/SET]
●
A maximum of 30 characters can be entered. (Maximum of 9 characters for [Face
Recog.] names)
Recog.] names)