Panasonic dmr-e50 User Manual
10
RQT6920
Se
tt
ing up
Change the settings if your television is:
≥
Widescreen (16:9 aspect ratio)
≥
Progressive
– Read your television’s operating instructions for details.
– Read your television’s operating instructions for details.
1
Press [SETUP] to show the menus.
2
Press [
3
,
4
] to select “TV Screen”
and press [
1
].
3
Press [
3
,
4
] to select “TV Type” and
press [ENTER].
4
Press [
3
,
4
] to select the item and
press [ENTER].
≥
If you select a progressive output (480P) item, select Video
in the on-screen menu and set “Transfer” to suit the material
(
in the on-screen menu and set “Transfer” to suit the material
(
➜
page 38).
To return to the previous screen
Press [RETURN].
When you are finished
Press [SETUP].
∫
Regarding Progressive Television Picture
Progressive image aspect (height to width ratio) is set at a standard
16:9. DVD-Video which has been set at 16:9 will be displayed cor-
rectly. However, 4:3 video material will be stretched to the right and
left when displayed.
16:9. DVD-Video which has been set at 16:9 will be displayed cor-
rectly. However, 4:3 video material will be stretched to the right and
left when displayed.
≥
To view the picture at the right aspect
– For televisions that allow the aspect of progressive images to
– For televisions that allow the aspect of progressive images to
be adjusted, use the function provided on the television and
adjust as necessary.
adjust as necessary.
– For televisions which do not allow the aspect of progressive
images to be adjusted, please set “Progressive” to “OFF” (
➜
page 38).
[Note]
≥
If the unit is connected to the TV through VIDEO OUT or S-
VIDEO OUT, output will be interlace only (even if you select pro-
gressive output).
VIDEO OUT, output will be interlace only (even if you select pro-
gressive output).
≥
When progressive output is on, closed captions can not be dis-
played.
played.
You can control televisions by entering the remote control code.
Press and hold [
Í
, POWER TV] and enter the
two-digit code with the numbered buttons.
e.g., 01: press [0]
➜
[1].
Code No. and Manufacturer
≥
Test by turning on the television and changing channels. Repeat
the procedure until you find the code that allows correct operation.
the procedure until you find the code that allows correct operation.
[Note]
If your television brand is not listed or if the code listed for your tele-
vision does not allow control of your television, this remote control
is not compatible with your television.
vision does not allow control of your television, this remote control
is not compatible with your television.
∫
Operation
Point the remote control at the television.