Panasonic dmr-e30eb User Manual

Page of 82
22
Playing discs (continued)
Changing audio
[RAM] [DVD-V] [VCD]
Remote control only
You can change the audio being received or played with the 
following procedure.
Preparation
Switch [DVD, TV] 
(15) to “DVD”.
During reception or play
Press [AUDIO] 
(31) to select the audio type.
How the type changes depends on when you press the button.
ª
While receiving a TV programme with NICAM
Automatic indication of the type of sound system which the 
programme being watched (NICAM/MONO) is broadcast.
(1) e.g.: “NICAM” is selected
If “NICAM OFF” is selected during manual tuning, “MONO” is 
always displayed.
ª
While playing a television programme recorded on 
DVD-RAM
If it is a recording of a stereo broadcast
LR
>L>R
^-------------}
(2) e.g.: “LR” is selected
ª
While playing a DVD Video
You can change the audio channel number each time you press 
the button. This allows you to change things like the soundtrack 
language.
(3) e.g.: English is the selected language
(4) The language is switched to French
ª
While playing a Video CD
LR
>L>R
^-------------}
(5) e.g.: “LR” is selected
For your reference
You can also use the DISPLAY menu to change the audio type.
You can change the audio for the images being played with 
simultaneous recording and play and Time Slip.
ª
When you have connected the unit to other 
equipment with an optical digital cable
You cannot change the audio type when you have used only an 
optical digital cable for connection in the following cases:
While playing stereo or bilingual broadcasts recorded on DVD-
RAM.
While playing something recorded from other equipment.
When using DVD-R or discs with LPCM recording
You cannot use [AUDIO] 
(31) or the DISPLAY menu to change 
audio type when a DVD-R is in the disc tray or recording is set to 
LPCM.
While receiving a bilingual TV broadcast
You can use the SETUP menus to select which audio type is 
recorded, either “M1” or “M2”. “M1” is the default setting. (page 60, 
“Sound”— “Bilingual Audio Selection”)
During play
The audio type selected for recording is played. This is displayed 
as “LR”.
ª
Recording sound using LPCM
To obtain higher quality recordings using LPCM, prepare as 
follows:
1) Select “LPCM” in the SETUP menu, “Sound”— “Audio Mode 
for XP Recording” (page 60).
2) Set recording mode to “XP”.
Note
Sound recordings made using LPCM require more information 
than usual. Consequently the picture quality of LPCM recordings 
may be less than that of normal XP mode recordings.
Seamless Play does not effect programmes that have been 
recorded with LPCM sound (page 60, “Picture”— “Seamless 
Play”).
(1)
BBC 1
NICAM
No Disc
L R
DVD-RAM
PLAY
L R
(2)
(3)
(4)
Sound track
1 ENG
Π
Digital  3/2.1ch
Sound track
2 FRA
Π
Digital  3/2.1ch
V-CD
PLAY
L R
(5)
B.book  22 ページ  2002年8月5日 月曜日 午後1時10分