Panasonic dmr-e30eb User Manual
72
Self-diagnosis
The self-diagnosis displays appear if a problem occurs with the unit.
The service numbers in the table appear when a problem occurs.
≥
The service numbers in the table appear when a problem occurs.
≥
The service numbers are a “U” followed by two digits.
Service
number
number
Unit status
Solutions
U11
The disc is dirty or badly
scratched.
scratched.
≥
Follow the instructions in “Maintenance and Handling” to clean the disc if it is dirty.
(page 69)
(page 69)
≥
The disc cannot be played if it is scratched and this display doesn’t disappear.
You have inserted a disc the
unit cannot play or record
on.
unit cannot play or record
on.
≥
Insert a disc the unit can play or record on. (page 10)
The DVD-RAM/PD lens
cleaner has finished
cleaning.
cleaner has finished
cleaning.
≥
Take the cleaner out of the unit.
U14
The unit is hot.
≥
The unit switches to standby automatically for safety reasons and you cannot operate it.
Wait for about 30 minutes for the service number to disappear.
Wait for about 30 minutes for the service number to disappear.
≥
Select a position with good ventilation when installing the unit.
≥
Do not block the cooling fan on the rear of the unit.
U99
The unit fails to operate
properly.
properly.
≥
Press [Í] to switch the unit to standby. Now press [Í] again to turn the unit on.
REMOTE
DVD
DVD
The remote control code is
wrong.
wrong.
≥
Change to the correct code. (page 63)
RECOVER
A power failure occurred or
the AC mains plug was
disconnected while the
power was ON.
the AC mains plug was
disconnected while the
power was ON.
≥
The unit is carrying out its recovery process. Wait until the message disappears.
Service number
B.book 72 ページ 2002年8月5日 月曜日 午後1時10分