Panasonic DP-MB350 User Manual
2. Preparation
17
For assistance, please contact an authorized Panasonic dealer.
2 Preparation
2For assistance, please contact an authorized Panasonic dealer.
Connections and Setup
2.1 Connections
Caution:
L
When you operate this product, the power outlet
should be near the product and easily
accessible.
should be near the product and easily
accessible.
Note:
L
Do not place any objects within the following
distance:
–
distance:
–
Left side (
8
): 40 cm (15
3
/
4
inches)
–
Right side (
9
) and back side (
j
): 10 cm (4
inches)
L
If any other device is connected to the same
telephone line, this unit may disturb the network
condition of the device.
telephone line, this unit may disturb the network
condition of the device.
L
A telephone handset cannot be connected directly to
this unit. To talk to the other party, please connect an
extension telephone.
this unit. To talk to the other party, please connect an
extension telephone.
Using surge protectors
L
The warranty does not cover damage due to power
line surges or lightning. For additional protection, we
recommend using a surge protector (
line surges or lightning. For additional protection, we
recommend using a surge protector (
k
).
Using network router/network hub
L
We recommend using network routers/network hubs
(
(
6
) under secure network environments. Consult
your network administrator for firewall settings, etc.
L
The warranty does not cover damage due to security
problems or any inconveniences relating to it.
problems or any inconveniences relating to it.
If the unit shares a single telephone line with a DSL
service
Fax transmission/reception may be unreliable, noise
interference may be heard during telephone
conversations, or Caller ID (page 54) may not function
properly. Please attach a DSL filter (
service
Fax transmission/reception may be unreliable, noise
interference may be heard during telephone
conversations, or Caller ID (page 54) may not function
properly. Please attach a DSL filter (
l
) to the telephone
line cord of the unit to prevent this. A DSL filter may be
available from your DSL service provider.
available from your DSL service provider.
1
Power cord
L
Connect to a power outlet
(120 V, 60 Hz).
(120 V, 60 Hz).
2
Telephone line cord
L
Connect to a single telephone line jack (RJ11C).
3 [
EXT
]
jack
L
You can connect an answering machine or an
extension telephone. Remove the stopper if
attached.
extension telephone. Remove the stopper if
attached.
4
Answering machine (not supplied)
5
To the Internet
6
Network router/Network hub (not supplied)
L
Also connect networked computers.
7
LAN cable (not supplied)
L
To assure continued emission limit compliance,
use only shielded LAN cable (category 5 straight
cable).
use only shielded LAN cable (category 5 straight
cable).
IMPORTANT NOTICE FOR THE USB
CONNECTION
CONNECTION
L
DO NOT CONNECT THE UNIT TO A
COMPUTER WITH THE USB CABLE UNTIL
PROMPTED TO DO SO DURING THE SETUP
OF MULTI-FUNCTION STATION (page 24).
COMPUTER WITH THE USB CABLE UNTIL
PROMPTED TO DO SO DURING THE SETUP
OF MULTI-FUNCTION STATION (page 24).
5
3
9
6
2
j
8
4
7
1
k
l