Panasonic dmr-e100 User Manual

∫ Helpful Hints

≥Go to Display in the SETUP menus and change the display’s brightness with “FL 

Display”.

≥The time on the unit’s display and the remaining recording time on the screen may be 

indicated less or more than actual value.

≥The time during fast forward and rewind, or the process during dubbing may not be 

displayed accurately.

≥When recording still pictures or SD VIDEO (MPEG4), the remaining capacity becomes 

less than when recording other materials.

≥In DVD-R, the remaining capacity does not increase even if programmes are erased.
≥When dubbing pictures with less motions in “MPEG2

#4”, they may be dubbed within 

small amount of capacity.

–

–

–

–
–

1] is 

≥Insert the disc correctly with the label facing up.
≥This unit cannot play discs other than DVD-RAM, DVD-R, DVD-Audio, DVD-Video, Video 

CD, CD and MP3 disc.

≥The disc is dirty. Clean it.
≥The disc may be badly scratched.
≥You inserted a blank DVD-RAM or DVD-R.

–

≥If “ ” appears on the TV, the operation is prohibited by the unit or disc.
≥If the unit is not operating at all, press [

, TIMER] to switch the unit to standby, then 

press [

, TIMER] again to turn the unit on. The unit may not be operating correctly due 

to lightning, static electricity, or some other external factor.

≥The Child Lock function is activated.

–
–

≥Some titles and chapters on DVD-Video are not played when you have changed the 

ratings level.

≥Some distortion is normal.

–

≥The languages are not recorded on the disc.
≥You may have to use the disc’s own menus to select languages.

–
–

≥The language is not recorded on the disc.

≥Subtitles are not recorded on the disc.
≥Turn the subtitles on.

–

≥This function depends on software availability. Angles can only be changed during 

scenes where different angles are recorded.

–

≥Return the unit's settings to the initial state (factory setting).

With the tray open, keep pressing [

:/6] and [5/9] on the main unit 

simultaneously for 5 or more seconds.

–

≥The unit is on standby to make a timer recording (“

” on the unit’s display is on).

≥[DVD, TV] is not switched to “DVD”.

Switch to “DVD” when operating this unit.

≥The remote control code is wrong.

Change to the correct code.

≥The batteries are depleted. Replace them with new ones.
≥Point the remote control at the remote control sensor on the main unit.
≥Remove obstacles between the remote control and main unit.
≥The Child Lock function is activated.
≥If you repeat inserting of discs or turning this unit on and off 50 times or more, the 

recording or editing of DVD-R may be disabled.

66–

–

≥The remote control code is wrong. Change to the correct code. Some TVs cannot be 

operated even if you change the code.

≥[DVD, TV] is not switched to “TV”. Switch to “TV” when operating the TV.

≥If the card dubbed by this unit is played back by other equipment, it may not be played back 

depending on the equipment.

DVD(B).book  71 ページ  ２００３年８月５日 火曜日 午後３時３０分