Panasonic dmr-hs2eb User Manual

Page of 98
21
Selecting between HDD and DVD 
drives
This unit incorporates an HDD and a DVD drive.
Select the drive (HDD/DVD) you intend to use - you may carry out 
recording and playback on the drive selected.
The HDD/DVD mode lamp 
(47)(48) on the front panel of the unit 
will light when you select a drive. The lit lamp indicates the drive 
that is currently selected.
To use the HDD:
Press [HDD] 
(6).
≥The HDD mode lamp (47) on the front panel of the unit will 
light (green).
To use the DVD:
Press [DVD] 
(6).
≥The DVD mode lamp (48) on the front panel of the unit will 
light (green).
For your reference
≥It is possible to watch playback from one drive while recording 
from another (editing is not possible).
≥When switching drives, the functions (play back, record or pause 
etc.) operate with respect to the drive currently selected. For 
example, if you are recording using DVD and playing back using 
the HDD, pressing [
∫] (7) will cause the HDD play back to stop. 
To stop the DVD recording, first select the DVD drive before 
pressing [
∫] (7).
≥Play back cannot be carried out from both HDD drive and DVD 
drive simultaneously.
If you select another drive, playback (if in progress) will be 
stopped.
≥If using DVD Video, when you select another drive, the contents 
of the menu screen may be returned to their initial state.
≥It is not possible to record a programme to both HDD and DVD 
simultaneously.
≥When the HDD drive is selected and a disc is being read after the 
disc tray has been opened/closed, the DVD mode lamp 
(48) will 
flash.
It is not possible to switch between HDD/DVD drives while a disc 
is being read.
Playing discs/programmes 
recorded on HDD
[HDD] [RAM] [DVD-R] [DVD-V] [CD] [VCD] 
Preparation
Switch [DVD, TV] 
(15) to “DVD”.
1
Press [DVD, 
Í
Í
Í
Í(1) to turn the unit on.
2
Press [HDD] or [DVD] 
(6) to select the playback 
drive.
≥The HDD/DVD mode lamp (47)(48) on the front panel of the 
unit will light. The lit lamp indicates the drive that is currently 
selected.
3
When DVD mode was selected above: 
Press [
<, OPEN/CLOSE] (43) to open the tray and 
insert a disc.
≥When the HDD drive is selected and a disc is being read 
after the disc tray has been opened/closed, the DVD mode 
lamp 
(48) will flash.
e.g.:DVD-RAM
(1) Arrow pointing 
inwards.
(2) Align correctly.
≥Insert label-up with the 
arrow facing in. (with 
double-sided discs, load 
so the label for the side you want to play is facing up.)
≥Insert inside the tray’s guides.
≥Insert one disc only.
4
Press [
1(21).
≥The disc tray closes and play begins.
(The unit takes some time to read the 
disc before play starts.)
≥If the Resume function (page 23) is not 
active, playback will begin from the most 
recently recorded programme.
≥If you insert a DVD-RAM with the write-protect tab set to 
“PROTECT” (page 89) and press [
<, OPEN/CLOSE] (43), 
play starts automatically.
ªTo stop play
Press [
∫] (7). (page 23, Starting play 
from where you stopped it)
≥A screen similar to the illustrated may 
appear when you stop play. Press [
∫] 
(7) again and you can use this unit’s 
tuner to watch television.
This screen is also shown when you are 
playing CDs.
ªTo pause play
Press [
;] (8).
Press again to restart playing.
Regarding the HDD (Hard Disk Drive)
When using this unit for the first time, the HDD has nothing 
recorded on it. You must record a programme etc to the HDD 
before you can enjoy playback.
(1)
(2)
B.book  21 ページ  2002年8月7日 水曜日 午後8時7分