Panasonic dmr-hs2eb User Manual

ªTo Manually Adjust the Audio Recording Level

The unit adjusts the recording level automatically to prevent sound 
distortion due to excessive peaks.
However, if you want to manually adjust the audio recording level, 
perform the operation steps below before you start the actual 
recording. We recommend you to adjust the level so that it peaks 
at approximately from -10 to -5 dB on the recording level indicator.

(31) for 3 

To adjust the left (L) and right (R) channels simultaneously:

2, 1] (10) 

(10) to exit the On Screen Display.

To adjust the left (L) and right (R) channels individually:

3, 4] (10) to select either the left (L) or right 

2, 1] (10).

Example: 

When the left (L) channel is 
selected.

(10) to exit 

For your reference
≥If L or R are selected, this unit will initially allow you to adjust only 

the audio recording level of that channel. If you wish to adjust the 
audio recording level of other channels, specify the channel by 
repeatedly pressing [AUDIO] and adjust using [

2, 1] (10).

≥It is not possible to adjust the audio recording level when 

recording from DV equipment.

ªRecording/Dubbing/Moving of a programme

This unit incorporates copyright protection technology for recording 
equipment known as CPRM (page 10). With some programmes 
recording, dubbing and/or moving may not be possible.

(1) Recording limit
(2) Usable Media
(3) Copy free
(4) Recording limited to one time
(5) Recording not possible
(6) Record
(7) Dub
(8) You cannot dub.
(9) Move
(10)You cannot record on DVD-R.
(11)You cannot record/dub on any media.

*Can be dubbed to the HDD but cannot be played back.

Move:
This is when a programme is moved to another storage media. 
The original programme will be erased.

The unit calculates a recording rate that enables the recording to fit 
in the time you set (within the remaining time on the disc) and with 
the best possible picture quality.

(11).

3, 4, 2, 1] (10) to select “FLEXIBLE REC” 

(10).

3, 4, 2, 1] (10) to set the recording time.

3, 4, 2, 1] 

(10) to select “Start” 
and press [ENTER] 
(10).

≥Recording starts.

For your reference
≥Press [STATUS] (28) during recording to show the 

remaining time.
It is displayed in the unit of minute.

≥It is not possible to change channel or recording 

mode while flexible recording is paused.

≥Recording time reduces if you repeatedly pause recording.
≥It is not possible to use FR recording to record a programme on 

the HDD drive which is longer than 6 hours.

Preparation
Switch [DVD, TV] 

(15) to “TV”.

(3) to change the input mode to “TV”.

W, X] (18) to change channels.

≥You can also select the channel with the numeric buttons 

(4).

For your reference
≥You can also do this if the unit is making a timer recording.
≥The recording is unaffected.

REC 83

ARD

LR

DVD-RAM

B.book  30 ページ  ２００２年８月７日 水曜日 午後８時７分