Panasonic gpf12d th-85pf12u Service Manual
21
TH-85PF12U
8 Service Fixture & Tools
8.1.
Service Stand
When conducting repairs and servicing, install the Plasma Display to the Service Stand.
Part number:
TZSA07021
Installation of plasma display:
1. Lock 2 casters.
2. Check that the Alignment bar is set to the Service Stand.
3. Remove 2 screws.
4. Join the stand hooks to the 4 notches on the Service Stand.
2. Check that the Alignment bar is set to the Service Stand.
3. Remove 2 screws.
4. Join the stand hooks to the 4 notches on the Service Stand.
5. Tighten 2 screws.
6. Remove the Alignment bar, then start conducting repairs and servicing.
7. After conducting repairs and servicing, remove the plasma display from the Service Stand in reverse order.
6. Remove the Alignment bar, then start conducting repairs and servicing.
7. After conducting repairs and servicing, remove the plasma display from the Service Stand in reverse order.
Note: Do not over-tighten the screws, as this could cause the fixtures to deform the Service Stand.