Panasonic dvd-s31a User Manual

Page of 24
Ge
tti
ng
 s
ta
rte
d
RQT6
9
3
3
6
Disc information
Discs that can be played
§
DVD-S31 is not compatible with WMA or JPEG.
Use discs with the above logos and that conform to specifications. The unit cannot play other discs correctly. Do not use irregularly shaped discs (e.g. 
heart-shaped), as these can damage the unit.
It may not be possible to play CD-R, CD-RW, DVD-R and DVD-RAM in all cases due to the type of disc or condition of the recording.
Discs that cannot be played
DVD-Audio, DVD-ROM, CD-ROM, CDV, CD-G, 
i
RW, DVD-RW, CVD, 
SACD, Divx Video Discs, Photo CD, DVD-RAM that cannot be removed 
from their cartridge, 2.6-GB and 5.2-GB DVD-RAM, and “Chaoji VCD” 
available on the market including CVD, DVCD and SVCD that do not 
conform to IEC62107.
Region number
The player plays DVD-Video marked with labels containing the region 
number or “ALL”. 
Built-in decoders
This unit has Dolby Digital and DTS 
decoders so you can enjoy these 
systems in stereo without connecting a 
separate decoder.
Video systems
Units for the Middle East, South Africa, Asia, Russia, Australia and N.Z.:
This unit can play PAL and NTSC, but your television must match the 
system used on the disc.
PAL discs cannot be correctly viewed on an NTSC television.
This unit can convert NTSC signals to PAL 60 for viewing on a PAL 
television (
 page 18, Video—NTSC Disc Output).
Output is interlace (576I), when playing PAL discs.
Units for the U.S.A., Canada, and with PX printed on the outer 
packaging:
PAL discs cannot be played.
Playing DVDs and Video CDs
The producer of these discs can control how they are played so you may 
not always be able to control play as described in these operating 
instructions (for example if the play time is not displayed or if a Video CD 
has menus). Read the disc’s instructions carefully.
DVD-RAM discs
The DVD-RAM you can play on this unit are those recorded with DVD 
video recorders, DVD video cameras, personal computers, etc. using 
Version 1.1 of the Video Recording Format (a unified video recording 
standard).
Remove discs from their cartridges before use and return them when 
you are finished, making sure that the labels of the disc and cartridge 
face the same way.
Some parts of the disc, for example where one program ends and 
another begins, may not play smoothly.
DVD-R discs
Panasonic DVD-R recorded and finalized
§
 on a Panasonic DVD video 
recorder or DVD video camera are played as DVD-Video on this unit.
CD-R and CD-RW discs
This unit can play CD-R/RW (audio recording disc) recorded with CD-DA, 
video CD, SVCD (conforming to IEC62107), WMA, MP3, or JPEG. 
Finalize
§
 the disc after recording.
See page 11 for more information about WMA, MP3, and JPEG.
§
A process that allows play on compatible equipment.
Disc structure
Disc structure and the labels given to the items on discs depend on the 
disc type.
Track:
the smallest division on CDs and Video CDs, or a single WMA/
MP3 file.
Chapter: the smallest division on DVD-Video.
Group:
equivalent to folders or albums on data discs.
Title:
the largest division on DVD-Video, usually an entire movie.
Program: the division on DVD-RAM equivalent to a single recording.
Picture:
a single JPEG file.
Play list: a group of scenes on DVD-RAM.
Scene:
DVD-RAM program sections specified and grouped into play 
lists on a DVD video recorder.
To clean discs
DVD-Video, Video CD, CD
Wipe with a damp cloth and then wipe dry.
DVD-RAM, DVD-R
Clean with an optional DVD-RAM/PD disc cleaner (LF-K200DCA1, 
where available).
Never use cloths or cleaners for CDs etc.
Handling precautions
Do not write on the label side with a ball-point pen or other writing 
instrument.
Do not use record cleaning sprays, benzine, thinner, static electricity 
prevention liquids or any other solvent.
Do not attach labels or stickers to discs. (Do not use discs with exposed 
adhesive from tape or left over peeled-off stickers.)
Do not use scratch-proof protectors or covers.
Do not use discs printed with label printers available on the market.
DVD-RAM
DVD-Video
DVD-R
SVCD
Video CD
CD
CD-R/RW
Shown as 
“DVD-VR” on the 
display
Conforming to 
IEC62107
`
[RAM]
[DVD-V]
[VCD]
[CD]
[WMA]
§
 
[MP3]
 
[JPEG]
§
Region
Number
Example
U.S.A., Canada, and 
units with PX printed 
on the outer packag-
ing
1
The Middle East and 
South Africa
2
Asia
3
Australia and N.Z.
4
Russia
5
2
4
1
1
ALL
3
5
2
2
ALL
3
5
2
3
ALL
4
6
2
4
ALL
3
5
1
5
ALL
R
Q
T693
3
Ge
tti
ng
 s
ta
rte
d
7
The remote control
Batteries
Insert so the poles (
i
 and 
j
) match those in the remote control.
Do not use rechargeable type batteries.
Do not:
mix old and new batteries.
use different types at the same time.
heat or expose to flame.
take apart or short circuit.
attempt to recharge alkaline or manganese batteries.
use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can damage 
items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long period of 
time. Store in a cool, dark place.
Use
Aim at the sensor (
 page 3, Control reference guide), avoiding 
obstacles, at a maximum range of 7 m (23 feet) directly in front of the unit.
The QUICK SETUP screen appears when you press [SETUP] the first 
time after purchase and assists you to make necessary settings.
Preparation
Turn on the television and select the appropriate video input on the 
television to suit the connections for the player.
[1]
Press [
Í
] to turn on the unit.
[2]
Press [SETUP] to show the QUICK SETUP 
screen.
e.g. Units for U.S.A. and Canada
[3]
Press [
3
4
2
1
] to select the menu language 
and press [ENTER].
[4]
Press [
3
4
] to select “Yes” to continue and 
press [ENTER].
[5]
Press [
3
4
2
1
] to select the item and press 
[ENTER].
Audio Language (
 page 18)
Subtitle Language (
 page 18)
TV Aspect (
 below)
Progressive Out (
 page 18)
[6]
Press [ENTER] and then [SETUP] to end the 
settings.
To return to the previous screen
Press [RETURN].
To access this screen again later
 page 18, Others—QUICK SETUP
TV Aspect
Select “4:3” (regular) or “16:9” (widescreen) to suit your television.
If you have a regular 4:3 television, you can also select how video on 
some discs is shown (
 page 18, Video—TV Aspect).
4:3 Pan&Scan (Factory preset)
Widescreen software is expanded to fill the screen 
of a 4:3 aspect television (unless prohibited by the 
producer of the disc).
4:3 Letterbox
Widescreen software is shown in the letterbox style 
on a 4:3 aspect television.
To enjoy progressive video
1. Connect to the component video input terminals on a 480P 
compatible television. (Video will not be displayed correctly if 
connected to an incompatible television.)
2. In QUICK SETUP, set “Progressive Out” to “Enable”.
3. Change “Video output mode” to “480P” (
 page 17).
All televisions manufactured by Panasonic and that have 480P input 
connectors are compatible. Consult the manufacturer if you have 
another brand of television.
If the unit is connected to the television through VIDEO OUT or 
S VIDEO OUT, output will be interlace, irrespective of the settings.
R6,  AA, UM-3
Quick setup
Í
SLEEP
A.SRD
CINEMA
D.ENH
GROUP
DIRECT NAVIGATOR
TOP
MENU
DISPLAY
SUBTITLE AUDIO ANGLE/PAGE QUICK REPLAY
RETURN
MENU
PLAY LIST
SKIP
STOP
PLAY
SLOW/SEARCH
CANCEL
SETUP
OPEN/CLOSE
3
2
1
9
8
S
10
0
7
6
5
4
PAUSE
ENTER
[1]
[3] 
– 
[6]
[2]0[6]
RETURN
D
E
QUICK REPLAY
ZOOM MODE
DOWN
UP
OPEN/CLOSE
 7 Í
I
[1]
SELECT
SETUP
ENTER    RETURN
QUICK SETUP
Select the menu language.
English
Français
Español