Panasonic EB-X200 User Manual

Page of 89
71
Applications
Infrared
By using the Infrared connection with another X200 or with other devices with an 
infrared port, you can transfer data between the devices.
Preparing for Infrared connection
¾
Place the X200 and another device with an Infrared port within the effective 
Infrared connection range of each other.
¾
There must be no obstruction between the two communicating devices.
¾
The Infrared ports of both devices must point at each other.
¾
If you use a PC, you need to set up an Infrared connection on the PC.
(Example: Start > Settings > Control Panel > Infrared > Options tab > Enable 
Infrared Communication
)
Sending data
The types of data you can send are: Contacts, Pictures and Sounds in My Media.
Ensure that the Infrared ports of your X200 and the second phone or device are 
pointing at each other with no obstructions in between.
Setting Infrared
You need to activate Infrared before receiving data.
From Infrared menu 
On or Off < / A
Sending pictures and sounds
From Idle display 
1
<
2
My Media < / A
3
Pictures or Sounds < / A
4
4 required item < / A
5
4 select data to send A
6
Send by Infrared < / A
Some downloaded files may be protected under copyright laws. These files 
should not be sent.
NOTE   When Infrared is set to on, “ 
 ” appears on the display. If Infrared is 
unused for 10 minutes or the phone is once switched off, it is 
automatically set to off and “ 
 ” disappears.
Applications
Infrared
If you try to send 
data that cannot 
be forwarded or 
saved, an error 
message will be 
displayed.