Panasonic dvd-s53 User Manual

Page of 28
RQTC0132
21
Troubleshooting guide
Power
No operation
No response 
when any buttons 
pressed.
This unit cannot play discs other than the ones listed in 
these operating instructions. 
(4)
The unit may not be operating properly due to lightning, 
static electricity or some other external factor. Turn the unit 
off and then back to ON. Alternatively, turn the unit off, 
disconnect the AC mains lead, and then reconnect it.
Condensation has formed: Wait 1 to 2 hours for it to 
evaporate.
No response when 
remote control 
buttons pressed.  
Check that the batteries are installed correctly. 
(8)
The batteries are depleted: Replace them with new ones. 
(8)
Point the remote control at the remote control sensor and 
operate. 
(9)
No picture or sound.
Check the video or audio connection. 
(6 to 8)
Check the power or input setting of the connected 
equipment.
You have forgotten 
your ratings 
password.
Reset all the settings 
to Factory Preset.
While stopped, remove the disc, and then press and hold 
[q] (PLAY) and [g] on the unit and then also press and 
hold [8] on the unit until “INITIALIZED” disappears from 
the television. Turn the unit off and on again. All settings will 
return to the default values.
No power.
Insert the AC mains lead securely into the household mains 
socket. 
(8)
The unit is 
automatically 
switched to the 
standby mode.
When “AUTO POWER OFF” is set to “ON”, the unit 
automatically switches to standby after approximately 30 
minutes in the stop mode. 
(19)
Before requesting service, make the following checks. If you are in doubt about some 
of the check points, or if the solutions indicated in the chart do not solve the problem, 
consult your dealer for instructions. (Reference pages are shown in parentheses.)
Tr
oub
leshooting guide
It takes time before 
play starts.
Play may take time to begin when an MP3 track has still 
picture data. Even after the track starts, the correct play time 
will not be displayed, however this is normal.
This is normal on DivX video.
The program 
functions do not 
work.
These functions do not work with some DVD-Videos.
Menu doesn’t 
appear.           with 
playback control
Press [g] twice and then press [q] (PLAY).
Play doesn’t start.
If a disc contains CD-DA and other formats, proper playback 
may not be possible.
This unit may not play WMA and MPEG4 that contains still 
picture data.
If playing DivX VOD content, refer to the home page where 
you purchased it. (Example: www.divx.com/vod)
No subtitles.
Display the subtitles. 
(13)
In A-B Repeat, point 
B is automatically set.
The end of an item becomes point B when it is reached.
Repeat play is 
automatically 
canceled.
A-B Repeat is canceled when you press [QUICK REPLAY].
Repeat play may be canceled when you press [MANUAL 
SKIP].
Specific operation impossible or incorrect
VCD
MP3 DivX
There is ghosting 
when progressive or 
HDMI output is on.
This problem is caused by the editing method or material 
used on DVD-Video, but should be corrected if you use 
interlace output. Change “VIDEO OUT (I/P)” in “VIDEO” 
menu to “INTERLACE”. 
(18) 
Pictures not in 
progressive output.
If the unit is connected to the television through VIDEO OUT,  
S VIDEO OUT, or AV
1
 terminal, output will be interlace.
Progressive video
1
 
The United Kingdom and Republic of Ireland
DVD-S53(RQTC0132-B)_EB_GN_GCS_after DivX text.indd   21
1/31/2007   6:16:36 PM