Panasonic dvd-s47eb User Manual
![Panasonic](https://files.manualsbrain.com/attachments/8f677e63fb64cbb6c62d09e6242996e7631380a8/common/fit/150/50/34d700d3fb727c767799b2da5cc474b219c0a4312e9e3044c99491a2fb9a/brand_logo.png)
R
Q
T
7251
15
Progressive video
[Except\the\United\Kingdom\and\Continental\Europe]
Page
Sound incorrect
Recording
Unit displays
Television displays
§
MPEG:
[except\Asia]
Clean this unit with a soft, dry cloth.
≥
Never use alcohol, paint thinner or benzine to clean this unit.
≥
Before using chemically treated cloth, read the instructions that came
with the cloth carefully.
with the cloth carefully.
There is ghosting when
progressive output is on.
progressive output is on.
≥
Change “Video Output Mode” in Picture Menu to “480I”. This problem is caused by the editing
method or material used on DVD-Video, but should be corrected if you use interlace output.
method or material used on DVD-Video, but should be corrected if you use interlace output.
11
Pictures not in progressive
output.
output.
≥
If the unit is connected to the television through VIDEO OUT or S VIDEO OUT, output will be
interlace.
interlace.
≥
Select “Enable (NTSC Disc Only)” in “Progressive Out (Component)” in “Video” tab. Then, select
“480P” in “Video Output Mode” in Picture Menu.
“480P” in “Video Output Mode” in Picture Menu.
–
12, 11
Sound distorted.
≥
Select “Off” in “Advanced Surround” in Audio Menu.
≥
Select “On” in “Attenuator” in Audio Menu if it causes distortion with AUDIO OUT connections.
≥
Noise may occur when playing WMA files.
≥
If the “D.MIX” indicator on the display goes out while playing a multi-channel DVD-Audio disc,
sound will only be output from speakers specified by the disc. Read the disc’s instructions for
details.
sound will only be output from speakers specified by the disc. Read the disc’s instructions for
details.
11
11
11
–
–
–
Piercing noise comes from the
speakers.
speakers.
≥
If you have connected a digital amplifier which does not include decoder, be sure to select “PCM”
in “Dolby Digital”, “DTS Digital Surround” or “MPEG
in “Dolby Digital”, “DTS Digital Surround” or “MPEG
§
” in “Audio” tab.
12
Effects do not work.
≥
None of the audio effects work when the unit is outputting bitstream signals from the DIGITAL
AUDIO OUT terminal. In this case, connect with the AUDIO OUT terminal.
AUDIO OUT terminal. In this case, connect with the AUDIO OUT terminal.
≥
Some audio effects do not work or have less effect with some discs.
≥
Multi Re-master and Advanced surround do not work if you have changed the play speed.
4
–
–
–
Cannot record to digital
recording equipment.
(Incorrect sound recorded.)
recording equipment.
(Incorrect sound recorded.)
≥
You cannot record WMA/MP3.
≥
You cannot record DVDs that have protection preventing digital recording.
≥
You cannot record DVDs if the recording equipment cannot handle signals with a sampling
frequency of 48 kHz.
frequency of 48 kHz.
≥
Make the following settings:
– Advanced Surround:
– Advanced Surround:
Off
– PCM Digital Output:
Up to 48 kHz
– Dolby Digital/DTS Digital Surround/MPEG
§
: PCM
–
–
–
–
–
11
12
12
12
12
“NOPLAY”
≥
You inserted a disc the unit cannot play; insert one it can.
≥
You inserted a blank disc.
3
–
–
“U11”
≥
Disc is dirty: Wipe it clean.
5
“U15”
≥
You inserted a DVD-R that has not been finalized.
3
“H
∑∑
”
∑∑
stands for a number.
≥
Trouble may have occurred. The number following “H” depends on the status of the unit. Turn the
unit off and then back to ON. Alternatively, turn the unit off, disconnect the AC mains lead, and
then reconnect it.
unit off and then back to ON. Alternatively, turn the unit off, disconnect the AC mains lead, and
then reconnect it.
≥
If the service numbers fail to clear, note the service number and contact a qualified service
person.
person.
–
–
“NODISC”
≥
You haven’t inserted a disc: Insert one.
≥
You haven’t inserted the disc correctly: Insert it correctly.
–
6
6
“
/
”
≥
The operation is prohibited by the unit or disc.
–
“Cannot display group xx,
content xx”
content xx”
≥
You are trying to display incompatible contents.
8
[Except\the\United\Kingdom[and\Continental\Europe]
“The progressive out is set to
“Disable””
“Disable””
≥
Select “Enable (NTSC Disc Only)” in “Progressive Out (Component)” in “Video” tab.
12
“This disc may not be played in
your region”
your region”
≥
You can only play DVD-Video if their region number is the same or includes the same region
number as the unit or if the DVD-Video is marked “ALL”. Confirm the region number for the unit on
the rear panel.
number as the unit or if the DVD-Video is marked “ALL”. Confirm the region number for the unit on
the rear panel.
Cover
No on-screen display.
≥
Select “On” in “On-Screen Messages” in “Display” tab.
12
Maintenance
T
roub
leshoot
ing gui
de/Mai
n
tena
nce