Panasonic gpf12du tc-65ps14 Service Manual

24

1. Remove the Plasma panel section from the servicing

stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasma panel surface facing
downward.

2. Remove the Support metal (C). (See section 8.16.)

3. Remove the screws (

×2 , 

×2 

 each) and remove the

Vertical bar-down assy (L, R).

4. Remove the screws (

×4 

 each) and remove the V-bar

connecting metal-top (L, R).

5. Remove the screws (

×2 

) and remove the V-bar fixing

metals (L, R).

6. Remove the screws (

×2 

 each) and remove V-bar con-

necting metal-bottom (L, R) and the Bracket covers (L,
R).

1. Remove the Control button unit. (See section 8.8.)
2. Remove the Support metal (C). (See section 8.16.)
3. Remove the Support metal (R). (See section 8.17.)
4. Remove the Vertical bar-down assy. (See section 8.18.)
5. Remove the flexible cables holder fastening screws (

×10

).

6. Disconnect the flexible cables (CB1, CB2, CB3, CB4 and

CB5).

7. Disconnect the flexible cable (C10).
8. Disconnect the connector (C14).

9. Remove the screws (

×5 

) and remove the C1-Board.

1. Remove the Support metal (C). (See section 8.16.)
2. Remove the flexible cables holder fastening screws (

×10

).

3. Disconnect the flexible cables (CB6, CB7, CB8, CB9 and

CB10).

4. Disconnect the flexible cables (C20, C21 and C26).

5. Remove the screws (

×5 

) and remove the C2-Board.