Panasonic KX-TD612E User Manual
Operation
User Manual
31
•
The CO button light shows the current status as follows:
Off: The line is idle.
Green on: You are using the line.
Red on: The line is in use.
Green on: You are using the line.
Red on: The line is in use.
•
CO1 to CO6 correspond to outside line numbers 81 to 83 respectively.
CO 1,2 : 81
CO 3,4 : 82
CO 5,6 : 83
CO 3,4 : 82
CO 5,6 : 83
•
Emergency call
You can dial pre-programmed emergency numbers without any restrictions.
You can dial pre-programmed emergency numbers without any restrictions.
•
Hands-free operation
You can have a conversation in the hands-free mode using the SP-PHONE button. You can
then perform other tasks at the same time.
Helpful hints for hands-free operation
You can have a conversation in the hands-free mode using the SP-PHONE button. You can
then perform other tasks at the same time.
Helpful hints for hands-free operation
Use your telephone in a quiet room for best performance.
If the other party has difficulty hearing you, decrease the volume.
If you and the other party talk at the same time, parts of your conversation will be lost. To
avoid this, talk alternately.
If the other party has difficulty hearing you, decrease the volume.
If you and the other party talk at the same time, parts of your conversation will be lost. To
avoid this, talk alternately.
•
To select the less expensive line automatically, dial "9" or press the Loop-CO button to
seize a line. (Least Cost Routing)
seize a line. (Least Cost Routing)
•
Confirming the dialled number before connecting
You can go off-hook after confirming the number you dialled. If you misdial, press " " to
clear each number from the right or press the R (FLASH) button to clear all numbers.
You can go off-hook after confirming the number you dialled. If you misdial, press " " to
clear each number from the right or press the R (FLASH) button to clear all numbers.
•
Call information
The following information can be referred to by repeatedly pressing the CO button in use.
The following information can be referred to by repeatedly pressing the CO button in use.
Phone number (outgoing call) or call duration (incoming call)
Meter
Call charge
•
To call another party without hanging up, just press the terminate button or "TRM" button
on the display, re-access an outside line and dial the new phone number.
on the display, re-access an outside line and dial the new phone number.
Customising Your Phone
•
Initial Settings — Preferred Line Assignment — Outgoing
Select the seized line when going off-hook.
•
Create or re-arrange the terminate button.
•