Panasonic kx-fp141e User Manual
8. Help
55
L
The ink film is not installed. Install it (page
12).
12).
L
The ink film is slack. Tighten it (see step 5 on
page 13).
page 13).
L
The fax machine is positioned near
appliances such as TVs or speakers which
generate an intense magnetic field.
appliances such as TVs or speakers which
generate an intense magnetic field.
—————————————————————
PAPER JAMMED
L
A recording paper jam occurred. Clear the
jammed paper (page 59).
jammed paper (page 59).
—————————————————————
PLEASE WAIT
L
The unit is checking that there is no slack or
crease on the ink film. Wait for a moment
while the check is completed.
crease on the ink film. Wait for a moment
while the check is completed.
—————————————————————
POLLING ERROR
L
The other party’s fax machine does not offer
the polling function. Check with the other
party.
the polling function. Check with the other
party.
—————————————————————
REDIAL TIME OUT
L
The other party’s fax machine is busy or has
run out of recording paper. Try again.
run out of recording paper. Try again.
—————————————————————
REMOVE DOCUMENT
L
The document is jammed. Remove the
jammed document (page 61).
jammed document (page 61).
—————————————————————
TRANSMIT ERROR
L
A transmission error occurred. Try again.
—————————————————————
UNIT OVERHEATED
L
The unit is too hot. Stop using the unit for a
while and let the unit cool down.
while and let the unit cool down.
Frequently Asked Questions
8.3 When a function does
not work, check here
not work, check here
8.3.1 Initial settings
I cannot hear a dial tone.
L
The telephone line cord is connected to the
[EXT] socket on the unit. Connect to the
[LINE] socket (page 16) (KX-FP141 only).
[EXT] socket on the unit. Connect to the
[LINE] socket (page 16) (KX-FP141 only).
L
If you used a splitter to connect the unit,
remove the splitter and connect the unit to the
wall socket directly. If the unit operates
properly, check the splitter.
remove the splitter and connect the unit to the
wall socket directly. If the unit operates
properly, check the splitter.
L
Disconnect the unit from the telephone line
and connect the line to a known working
telephone. If the working telephone operates
properly, contact our service personnel to
have the unit repaired. If the working
telephone does not operate properly, contact
your telephone company.
and connect the line to a known working
telephone. If the working telephone operates
properly, contact our service personnel to
have the unit repaired. If the working
telephone does not operate properly, contact
your telephone company.
L
The mains lead or telephone line cord is not
connected. Check the connections.
connected. Check the connections.
L
If you connected the fax machine through a
computer modem, connect the fax machine
directly to a telephone line socket.
computer modem, connect the fax machine
directly to a telephone line socket.
The unit does not ring.
L
The ringer volume is turned OFF. Adjust it
(page 17).
(page 17).
L
The TAD ring setting of feature #06 is set to
“RINGER OFF”. Change to another ring
setting (page 46) (KX-FP145 only).
“RINGER OFF”. Change to another ring
setting (page 46) (KX-FP145 only).
8.3.2 General
The unit displays “CHECK PAPER” though the
paper is inserted.
paper is inserted.
L
The paper is inserted halfway. Insert it
correctly (page 15) and press {START} to
clear the message.
correctly (page 15) and press {START} to
clear the message.
The other party complains they only hear a
fax tone and cannot talk.
fax tone and cannot talk.
L
FAX ONLY mode is set. Tell the other party
the number is only used for faxes.
the number is only used for faxes.
L
Change the receiving mode:
–
–
KX-FP141: TEL mode (page 31)
–
KX-FP145: TAD/FAX mode (page 32) or
TEL mode (page 31)
TEL mode (page 31)
The {REDIAL}/{PAUSE} button does not
function properly.
function properly.
L
If this button is pressed during dialling, a
pause will be inserted. If pressed
pause will be inserted. If pressed
FP141-145E.book Page 55 Wednesday, August 20, 2003 11:00 AM