Panasonic HX-DC10 User Manual

VQT3M88

i The scene mode changes to 

 when the focus is set to 

 or -.

i Even if the focus is set to 

 or -, it changes to * when the scene 

mode is set to any setting other than 

.

When the status indicator is flashing fast or slow, it may indicate one of the 
following conditions.

i This may indicate that the battery has been fully discharged, or when the 

battery temperature is high or low. The battery can be charged, but in 
some cases it may take several hours to fully charge it.

i During normal charging, the status indicator flashes at about 2-second 

intervals. However, even in this case, depending on the ambient 
conditions, the status indicator may flash at 4-second intervals until the 
battery is fully charged.

i The battery pack cannot be charged. Remove the battery pack from the 

camera once and reinsert it, then begin charging it again.

i Check to see that there is no dust, grime or foreign matter adhering to the 

camera or battery, and make sure that the battery pack is correctly 
inserted. Turn off the camera before cleaning it of dust, grime or other 
foreign matter.

i The battery pack or the ambient temperature is very high or very low. Try 

charging the battery pack again after it has returned to a suitable 
temperature. If the battery pack still cannot be charged, it is possible that 
the camera, the battery pack or the AC adaptor may be defective.

i Charging is complete.
i If the status indicator turns off even though charging is not completed, it is 

possible that the camera, the battery pack or the AC adaptor may be 
defective.