Panasonic KV-S3065CW User Manual
13
Loading Documents
Acceptable documents
Document size:
Paper thickness: Continuous paper feeding
40~157 g/m
2
Single paper feeding
20~157 g/m
2
Document smaller than A7 size
157 g/m
2
(42 lbs.) only
Maximum number of sheets loadable on the hopper tray:
≥ Each number of sheets indicates a guideline for fresh paper.
≥ The number of sheets depends on the paper quality. If a paper feed problem occurs, reduce the number of sheets
≥ The number of sheets depends on the paper quality. If a paper feed problem occurs, reduce the number of sheets
of the document loaded on the hopper.
≥ The height of the document should not exceed the limit mark on the document guide.
Recommendable paper: Plain paper
Recommendable paper: Plain paper
The following types of documents may not be scanned properly.
≥ Broken or notched documents
≥ Curled, wrinkled or folded documents
≥ Curled, wrinkled or folded documents
≥ Perforated or punched documents
≥ Not rectangular or irregularly shaped documents
≥ Tracing paper
≥ Thermal paper
≥ Not rectangular or irregularly shaped documents
≥ Tracing paper
≥ Thermal paper
When scanning is not performed properly, try the following methods:
≥ Set the feed speed to “Slow”.
≥ Scan the documents by manual feeding.
≥ Set the paper path selector to straight.
≥ Set the feed speed to “Slow”.
≥ Scan the documents by manual feeding.
≥ Set the paper path selector to straight.
The following types of documents may cause frequent jams and double feeding.
≥ Extremely smooth or shiny paper or paper that is highly textured
≥ Paper with carbon
≥ Carbonless paper
If a paper jam or double feeding occurs, clean the rollers.
When a jam occurs at the document feeder, reduce the number of sheets loaded on the hopper to about 20.
≥ Paper with carbon
≥ Carbonless paper
If a paper jam or double feeding occurs, clean the rollers.
When a jam occurs at the document feeder, reduce the number of sheets loaded on the hopper to about 20.
Types of documents to avoid
≥ OHP sheets, other plastic films, cloths, or metallic sheets.
≥ Paper with irregularities such as tabs, staples, paste, etc.
≥ Documents with wet ink
≥ Thick or irregular documents such as envelopes, documents that are glued together, etc.
≥ Paper with irregularities such as tabs, staples, paste, etc.
≥ Documents with wet ink
≥ Thick or irregular documents such as envelopes, documents that are glued together, etc.
Be sure to remove the document from the exit tray after it is scanned.
When scanning different size documents, scanned sheets may need to be reordered for optimum performance.
Thick, thin or important document should be scanned by fed manually one sheet at a time.
When scanning different size documents, scanned sheets may need to be reordered for optimum performance.
Thick, thin or important document should be scanned by fed manually one sheet at a time.
g/m
2
40
52
64
75
80
90
104
157
lb.
11
14
17
20
21
24
28
42
Max. number
of sheets
of sheets
Width less than A4 short edge
350
320
300
250
240
210
180
120
Width between A4–A3 short edge
240
220
200
160
160
140
120
80
70~431 mm (2.75~17 in.)
48~297 mm (1.9~11.7 in.)
Less than
5 mm
5 mm
Less than
5 mm
5 mm
Curl:
Fold:
Feeding direction
Feeding direction