Panasonic KX-HCM10 User Manual
Operating Instructions
14
1.3
Camera Feature Locations
1.3.1
Front View
Power Indicator
Power Indicator can be controlled on Indicator Control window on page 84.
Power Indicator blinks in the following situations.
Power Indicator blinks in the following situations.
•
During the lens center positioning after turning on the power.
•
During the Update Firmware.
•
During initializing after pushing CLEAR SETTING button.
•
During getting the IP address from the DHCP server.
•
Because of the internal failure of Network Camera. Refer to page 111.
Fixed Focus Lens and Pan/Tilt operation
Fixed Focus Lens can move in the Pan/Tilt operation. Operation bar on the Single
Camera screen can operate the Pan/Tilt. The Pan/Tilt moves the lens horizontally
120° and downward 45°. Refer to page 43 for the Pan/Tilt operation.
Camera screen can operate the Pan/Tilt. The Pan/Tilt moves the lens horizontally
120° and downward 45°. Refer to page 43 for the Pan/Tilt operation.
Notes
•
Do not forcedly move the lens part around the Fixed Focus Lens.
Touching it may damage the Pan/Tilt motor.
Touching it may damage the Pan/Tilt motor.
•
Do not touch the Fixed Focus Lens. Touching it may leave a fingerprint
and can cause the image to be out of focus. This can also take away
the protective coating on the Fixed Focus Lens.
and can cause the image to be out of focus. This can also take away
the protective coating on the Fixed Focus Lens.
Power Indicator
(Refer to page 84 for the setup.)
(Refer to page 84 for the setup.)
Fixed Focus Lens
1 m (40 inches)—Infinity
1 m (40 inches)—Infinity
Pan: -60° to +60°
Tilt: 0° to -45°
The field of view in Pan/Tilt ranges
horizontally about 165° and
vertically about 78°.
horizontally about 165° and
vertically about 78°.