Panasonic KX-HCM10 User Manual
Operating Instructions
[For assistance : 1-800-272-7033]
23
(vii) is Max. bandwidth Usage setting. It can restrict the transmit bandwidth.
Instructions for the data fields
ii
Port No.**
•
You can setup the port No. of Network
Camera. (Default value is 80.)
If you use Router (including KX-HGW200)
and two or more cameras are connected with
the network, it is necessary to setup the
unique port No. of each camera and except
the following Port No..
Camera. (Default value is 80.)
If you use Router (including KX-HGW200)
and two or more cameras are connected with
the network, it is necessary to setup the
unique port No. of each camera and except
the following Port No..
•
Using with other network products.
•
Using with Network Camera (20, 21, 25, 110).
iii Static*
•
IP Address
•
Subnet Mask
•
Please check Static, when specifying the IP
Address assigned to the Network Camera
from your network administrator or ISP
(Internet Service Provider).
And enter the specified IP Address and
Subnet mask in each data field.
Address assigned to the Network Camera
from your network administrator or ISP
(Internet Service Provider).
And enter the specified IP Address and
Subnet mask in each data field.
DHCP***
•
Host name
•
Please check DHCP (Dynamic Host
Configuration Protocol), when you use Single
Camera and the ISP uses the DHCP server
function which assign an IP Address to the
Network Camera automatically. And enter the
Host name.
Configuration Protocol), when you use Single
Camera and the ISP uses the DHCP server
function which assign an IP Address to the
Network Camera automatically. And enter the
Host name.
Internet
(Global IP Address or URL)
vvv.xxx.yyy.zzz:80
vvv.xxx.yyy.zzz:81
vvv.xxx.yyy.zzz:80 192.168.0.3:80
vvv.xxx.yyy.zzz:81 192.168.0.2:81
(Port No.)
Port Forwarding Function
(Local IP Address)
(Local IP Address)
192.168.0.254
192.168.0.1
(Local IP Address)
192.168.0.2
(Port No.)
81
(Local IP Address)
192.168.0.3
(Port No.)
80
Router or Panasonic Broadband
Networking Gateway KX-HGW200