Panasonic KX-HCM10 User Manual
Operating Instructions
42
2.4.1
Using the Functions
Go to Top Page
Top Page screen allows you to select the Top Page items.
1.
Click the
button on the Network Camera Setup Page.
See the Network Camera Top View Image Screen.
Network
Network screen allows you to set the following Network parameters.
•
You can set disable Network Configuration from Setup Program of CD-ROM
for network security.
for network security.
•
You can set up the Port No., Static/DHCP, Default Gateway, DNS, DDNS, MAX
Bandwidth Usage. (Network Setup items of this section are as same as Setup
items of CD-ROM.)
Bandwidth Usage. (Network Setup items of this section are as same as Setup
items of CD-ROM.)
(6)
Top View Image
Image Resolution, Image Quality, Regularly Refresh
interval setting.
interval setting.
(7)
Image Transfer
Trigger: mode, time, method, buffering, mail & FTP
setting.
setting.
(8)
Camera Setup
White Balance, Power line frequency, Pan/Tilt/
Brightness setting.
Brightness setting.
(9)
Multi-Camera
Multi-Camera setting (up to 4 cameras)
(10)
Digital Output Control Digital output setting (Open or Short to GND)
(11)
LED Control
Power LED Control setting. (ON or OFF)
(12)
Restart
Restart the Network Camera with all the parameters
preserved.
preserved.
(13)
Update Firmware
Update Firmware setting.
(14)
Reset to Factory
Default
Default
Initialize all the parameters to the factory preset.
(15)
Help
Provides you with instructions about the commands
and functions of the Network Camera Setup Page.
and functions of the Network Camera Setup Page.
No.
Item
Description
Go to Top Page