Panasonic KX-HCM10 User Manual
Operating Instructions
62
Multi-Camera
Multi-Camera screen allows you to set the Multi-Camera parameters.
•
It is possible to set the IP Address and Camera Name of Multi-Camera.
•
When using Multi-Camera, setup is required.
1.
Click the
button on the Network Camera Setup Page.
The next screen appears.
2.
Select the each parameter in the proper data field.
•
To reset the current settings, click
.
Then it returns to Setup Page, without saving setting value.
3.
When you have finished, click
.
•
The setting will be saved.
Power Line
Frequency
Frequency
It can select the Flicker Correction by power supply frequency.
•
60Hz (default)
•
50Hz
Please select 60Hz in US.
Pan/Tilt Control
Brightness Control
Brightness Control
You can lock the Pan & Tilt (including Pan Scan)/Brightness
Control.
Please select enable or disable.
If you select disable, it is displayed Locked on control bar
when you click these buttons.
Control.
Please select enable or disable.
If you select disable, it is displayed Locked on control bar
when you click these buttons.
Multi-Camera
Cancel
Save