Panasonic KX-FLB882CX User Manual

1. Introduction and Installation

1.4.2 Rear view

Removing the shipping tape
Remove the shipping tape (

1) and pad (2).

Note:

Shipping tape positions are subject to change
without notice.

Installation

1.5 Toner cartridge and drum unit

The supplied toner cartridge is a starter toner cartridge.

Caution:

Read the following instructions before you begin
installation. After you have read them, open the
drum unit protection bag. The drum unit contains
a photosensitive drum. Exposing it to light may
damage the drum. Once you have opened the
protection bag:
–

Do not expose the drum unit to light for more
than 5 minutes.

–

Do not touch or scratch the black drum
surface.

–

Do not place the drum unit near dust or dirt,
or in a high humidity area.

–

Do not expose the drum unit to direct
sunlight.

We cannot be responsible for any damage to the
unit or degradation of print quality which may
occur from the use of a non-Panasonic toner
cartridge and drum unit.

Do not leave the toner cartridge out of the
protection bag for a long time. It will decrease the
toner life.

Do not add toner to the toner cartridge.

Before opening the protection bag of the new toner
cartridge, shake it vertically more than 5 times.

Remove the toner cartridge and drum unit from the
protection bags.

Do not touch or scratch the black drum surface
(

1).

A Recording paper guides

B Speaker

C USB interface connector

D LAN interface connector

E LED

F External telephone jack

G Telephone line jack

H Manual input tray

I Power inlet

B C

H I

F G

FLB882CX-PFQX2773ZB-OI-en.book Page 10 Friday, October 5, 2007 11:45 AM