Panasonic KX-P8420 User Manual

Possible Cause: Network or TCP/IP connection is not established.

Corrective Action: Check Network connection or TCP/IP connection by ping command.

Possible Cause: The Web Browser is not matched to the requirement.

Corrective Action: Use the version of Browser that are specified in the manual.

Possible Cause: The connection setting of the browser has to be changed

Corrective Action: Check the connection setting of the browser. If Proxy server is always accessed, change the

setting so that KX-P8420 can be directly accessed.

Possible Cause: Java applet is not set to Enable.KX-P8420 Fiery WebTools are Java based programs and Java

applet need to be fully enabled.

Correct Action: Please follow the procedures described in “Setting up Fiery WebTools in KX-P8420 Operating

Instructions manual.

Possible Cause: Ethernet configuration or Network environment has a problem.

Correct Action: Change Ethernet speed of the printer by Ethernet port setup menu. Or if your PC and KX-P8420 is

connected to the separate hub or network facilities, reconnect the PC or KX-P8420 so that both are connected to the

same network facilities.

Possible Cause: Unnecessary 0 is added in URL address.

Correct Action: Do not add the “0” in the following case.

  (Wrong)http://179.060.027.181 (Correct) http://179.60.27.181

Trouble: Cannot access to WebSetup using Ineternet Explorer 4.01 SP1.

Corrective Action: Change Java VM setting from “Run in sandbox” to Enable.

1. Select Internet Options in the View menu.

2. Click the Security tab.

3. Click the circle next to Custom (for expert users) in the Local Intranet zone.

4. Click Settings button. The Security Settings window appears.