Panasonic kx-mb263hx User Manual

Page of 104
Important Information
5
Laser radiation
Fuser unit
Note:
L
During or immediately after printing, the area near 
the recording paper exit (
3) also gets warm. This is 
normal.
Toner cartridge
Be careful of the following when you handle the toner 
cartridge:
Important safety instructions
When using this unit, basic safety precautions should 
always be followed to reduce the risk of fire, electric 
shock, or personal injury.
1. Do not use this unit near water, for example near a 
bathtub, wash bowl, kitchen sink, etc.
2. During thunderstorms, avoid using telephones 
except cordless types. There may be a remote risk of 
an electric shock from lightning (KX-MB773/KX-
MB783 only).
3. Do not use this unit to report a gas leak, when in the 
vicinity of the leak (KX-MB773/KX-MB783 only).
When moving the unit, make sure you are 
using the side grips (
1).
CLASS 1 LASER PRODUCT
The printer of this unit utilises a laser. Use of 
controls or adjustments or performance of 
procedures other than those specified 
herein may result in hazardous radiation 
exposure.
Laser diode properties
Laser output : 5 mW max
Wavelength : 760 nm – 810 nm
Emission duration : Continuous
The fuser unit (
2) gets hot. Do not touch it.
1
1
If you ingest any toner, drink several glasses 
of water to dilute your stomach contents, 
and seek immediate medical treatment.
If any toner comes into contact with your 
eyes, flush them thoroughly with water, and 
seek medical treatment.
If any toner comes into contact with your 
skin, wash the area thoroughly with soap 
and water. If there is skin irritation, seek 
immediate medical treatment.
If you inhale any toner, move to an area with 
fresh air and consult local medical 
personnel.
2
3
MB263HX_773_783EX-PFQX2807ZC-OI-en.book  Page 5  Monday, August 6, 2007  11:42 AM