Panasonic KX-PS8000 User Manual

Scanner is reserved by
other device!

Scanner is reserved by
other application!

Scanner is being used by another
device.

Scanner is being used by another
application.

BRescan later when the scanner is free

from other jobs.

BClose the application which controls the

scanner, turn off the system
(scanner/printer/computer), then turn it
on again.

BRescan later when the scanner is free

from other jobs.

BRescan after closing the application

which controls the scanner.

BClose the application, turn off the

system (scanner/printer/computer), then
turn it on again.

PTAB3D.DLL was not
found!!

Power Off or Cable Error!
Check that the scanner is
powered on, and the
SCSI cable is connected
correctly.

Close the application which controls the
scanner driver, turn off the system
(scanner/printer/computer), then turn on
again.

The scanner is not recognized.

The file Ptab3d.dll is not found.

Reinstall the KX-PS8000 software.

winaspi.dll is not found.

SCSI board is not set correctly.

Correctly set the SCSI board in the
computer. (Refer to the instructions
manual of the SCSI board.)
For any other trouble related to SCSI,
refer to the SCSI section of
Troubleshooting 

( 

☞ P. 163)

.

Resource DLL file is not
found.

Reinstall the KX-PS8000 software.

The necessary file for printing is not
found.