Panasonic KX-PS8000 User Manual

*.DLL not found

*.DLL function Error

The necessary file for printing is not
found.

Reinstall the KX-PS8000 software.

■ Some applications settings may take priority over the printer driver settings.

The printer does not print
correctly (not an error
message).

The computer is not properly
communicating with the printer.

Follow the procedure below and disable
the bi-directional interface.
1. Double-click Status display setup icon in

KX-PS8000 Utilities program group.

2. Click Device tab.
3. Click off Monitor Printer check box.
4. Click OK.

The Status Display function becomes
ineffective.

Unable to Allocate
Memory

BClose the windows of the applications

except for the one which controls the
printer, then print again.

BTurn off the computer, then turn it on

again.

The computer's internal memory for
printing is insufficient.

Printing aborted for
occurred SCSI error.

Turn off the system (scanner / printer /
computer) and turn on again. Then print
the document again.

The printer is not responding.

SCSI Error!! Time Out
occurred.

An illegal error has occurred.

BConfirm the SCSI board is correctly

installed in the computer or cable is
correctly connected.

BTurn off the computer, then turn it on

again.

No ASPI managers were
found!!

One or more ASPI for
DOS managers are
loaded which do not
support ASPI for WIN16!!

Correctly install the SCSI board and its
driver. (Refer to the instructions manual of
the SCSI board.)
For any other trouble related to SCSI,
refer to the SCSI section of
Troubleshooting 

( 

☞ P. 163)

.

SCSI board and its driver are not
installed correctly.

Resource DLL file is not
found.

Check sum error!!

File ID not match!!

Table file open error!!

Table file read error!!

Unable to Free Memory!!

Re-boot Windows.

Something happened to the memory
environment of Windows.

SCSI Command
parameter error!!
Abort printing.

Re-boot PC and Printer.

The board or cable failed to function
properly when a SCSI command
was being transferred.