Panasonic KX-PS8000 User Manual

Unable to Allocate
Memory!!

There was an error
writing to KXPS8000GDI:
for the printer (Panasonic
KX-PS8000):

The printer is not ready.
Make sure it is turned on
and on-line. To continue
printing, click retry.
Windows will automatically
retry after 5 seconds

BCable connection is improper or

the printer is not ready.

BThe terminator setting is

improper.

Perform the following procedure.
1. Confirm that the terminator is correctly

set.

2. Confirm that the printer is ready.
3. Confirm that the printer is correctly

connected with a SCSI cable.

4. Turn off the computer, then turn it on

again.

BClose all applications except for the one

which controls the printer, then print it
again.

BTurn off the computer, then turn it on

again. Then print the document again.

The memory for printing is
insufficient.

Resource DLL file is not
found.

Reinstall the KX-PS8000 software.

The necessary file for printing is not
found.

Can not load pclradj.dll

Table file open error!!

Check sum error!!

File ID not match!!

Table file read error!!

■ Some applications settings may take priority over the printer driver settings.

Increase the hard disk space.

If it is difficult to increase the hard disk
space or printing error occurs even after
increasing the hard disk space, change
the spool data format from EMF to RAW
by performing the following steps.
However, RTA (Return To Application: the
length of time between the start of printing
and the return of control to an application)
of RAW is longer than that of EMF.

1. Click Start, select Settings, then click

Printers.

2. Click the Panasonic KX-PS8000 icon.
3. Click the File menu, then click

Properties.

4. Click the Details tab and Spool

settings....

5. Change the Spool data format to

RAW, then click OK.

Windows could not write
to the printer spool file.

Make sure your disk has
enough free space and
try again.

Hard disk space is insufficient.