Panasonic kx-p8410 User Manual

B

The printer was
turned on after
turning on the
computer.

B

The terminator
setting is improper.

B

SCSI setting or
cable connection is
improper.

The necessary file is
not installed in the
computer.

Not Detect.

Turn off the printer and the
computer, then turn them
on again. If the trouble still
remains, confirm the
following points.

B

The terminator is
correctly set.

B

The SCSI board is
correctly installed in the
computer.

B

The system is correctly
connected with SCSI
cables.

B

Each SCSI device has a
different ID Number.

Invalid LPT Port.

SCSI board is not
correctly set.

Correctly set the SCSI
board in the computer.
(Refer to the manual of the
SCSI board.) 
For any other trouble
related to SCSI, refer to
the SCSI section of Care
and Maintenance 

Unavailable LPT port is
selected when using
Windows 3.1.

No ASPI managers are
loaded. This typically
occurs when a DOS
ASPI manager is not
resident in memory.

Reinstall the KX-P8410
software.

Select the other available
LPT port by following the
procedure below.
1. Double click the 

icon.

2. Double click the 

icon.

3. Double click the 

icon.

4. Click Connect... .
5. Click the other port, then

click OK.

6. Click Close.

Load Library Error!,
File Open Error! or
Install Error! appears
and Status Display does
not appear.

ASPI for Win 16 or 32
could not properly
initialize itself. This may
be caused by a lack of
system resources.

Lack of system
resources, or other
trouble related to
SCSI.

Close some application
and retry. For any other
trouble related to SCSI,
refer to the SCSI section of
Care and Maintenance