Panasonic KX-TCD735ALM User Manual
40
Phonebook
J o h n M i l l e r
< E n t e r P h o n e N o >
< E n t e r P h o n e N o >
< E n t e r N a m e >
Audible Caller Ring Feature
When receiving a call, you can easily figure out who is calling with this feature. For example, if you store
the phone number with name of John Miller into the base unit phonebook and record an audible caller
ring as “Mr. Miller”, you can hear recorded sound after ringing when receiving a call from the same
phone number you stored into the base unit phonebook. This feature requires Caller ID subscription.
See page 56 for setting the audible caller ring ON/OFF.
the phone number with name of John Miller into the base unit phonebook and record an audible caller
ring as “Mr. Miller”, you can hear recorded sound after ringing when receiving a call from the same
phone number you stored into the base unit phonebook. This feature requires Caller ID subscription.
See page 56 for setting the audible caller ring ON/OFF.
with the Handset
Storing Names and Phone Numbers into the Base Unit
Phonebook
Storing Names and Phone Numbers into the Base Unit
Phonebook
Make sure that the power is ON (p. 15), and the unit is in the standby mode.
1
Press .
2
Press
or
until the arrow points
to “
New Phonebook
”, then press
.
3
Press
or
until the arrow points
to “
Base Phonebook
”, then press
.
•
The display shows the number of remaining
phonebook items, then “
phonebook items, then “
<Enter Name>
”.
4
Enter a name up to 16 characters with
the keypad,
the keypad,
,
or
.
•
To select characters, see page 35.
5
Press .
•
“
<Enter Phone No>
” is displayed.
C
6
Enter a phone number, up to 24 digits.
•
Pressing
erases the digit to the left of
the cursor. To erase all digits, press and
hold .
hold .
7
Press .
8
Press
to select “
Start
”, then start
recording after a long beep. When finish
recording, press
recording, press
.
•
We recommend you to record as briefly as
possible (less than 3 seconds).
possible (less than 3 seconds).
•
If you do not need to record, select “
Skip
”
or “
No sound
”, then press
.
9
While “
Save
” is at the arrow, press
.
•
A beep sounds and “
Saved
” is displayed.
•
The display will return to “
<Enter Name>
”.
You can continue the storing procedure begin
with step 4. To return to the standby mode,
press
with step 4. To return to the standby mode,
press
or wait for 60 seconds.
C
C
•
If a pause is required for dialling, press
.
A pause can be stored in a phone number
counting as one digit (p. 48).
counting as one digit (p. 48).
•
You can exit the programming mode any time
by pressing
by pressing
.
•
If the display shows “
Memory Full
” in step
2, the display will return to the standby mode.
You must clear the other caller information in
the phonebook (p. 41).
You must clear the other caller information in
the phonebook (p. 41).
E n t e r
N e w P h o n e b o o k
2 0 M e m o r y A v a i l
N e w P h o n e b o o k
2 0 M e m o r y A v a i l
KX-TCD735ALM(E)-2(32~49) 2002.06.21 5:02 PM Page 40