Panasonic KX-TDA50 User Manual
PC Programming Manual References
3.14 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—SupplementaryService—
COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS, E911
3.35 [1-3] Option—
New Card Installation—ISDN Standard Mode for PRI23 Card (KX-TDA100/
KX-TDA200/KX-TDA600 only)
13.1.20 Private Network Features—QSIG—CF (Call Forwarding)
Description
The PBX forwards the call to a destination extension in another PBX in the QSIG network. The destination can
be set on your own PBX on an extension basis as the forward destination of CO line calls (
be set on your own PBX on an extension basis as the forward destination of CO line calls (
Forwarding)).
If the same trunk group is used for the incoming call and the forwarded call, the following situation will be
possible.
If the same trunk group is used for the incoming call and the forwarded call, the following situation will be
possible.
[Example]
PBX-1
QSIG
PBX-2
Dials "2000".
PBX-1
QSIG
PBX-2
Extn. 1001
Extn. 2000
Extn. 1001
Extn. 2000
(Forward Destination
of CO Line Calls: 1001)
of CO Line Calls: 1001)
Call to 2000
1
Forwarded
to 1001
to 1001
2
3
Extn. 1000
Extn. 1000
1
Extension 1000 of PBX-1 dials extension
number "2000", and the call is sent to
extension "2000" of PBX-2 through QSIG
network.
number "2000", and the call is sent to
extension "2000" of PBX-2 through QSIG
network.
2
The call is forwarded to the forward
destination of CO line calls of extension
2000, which is extension "1001" of
PBX-1.
destination of CO line calls of extension
2000, which is extension "1001" of
PBX-1.
3
The call between PBX-1 and PBX-2 is
released, and the call is connected
directly to the forward destination of
extension 2000.
released, and the call is connected
directly to the forward destination of
extension 2000.
Conditions
•
This feature can be enabled or disabled on each ISDN (QSIG) port of the PBX.
256
Feature Manual
Document Version 2008-11
13.1.20 Private Network Features—QSIG—CF (Call Forwarding)