Panasonic kx-tcd820fx User Manual
Preparation
12
Connections
When the AC adaptor is connected, a short
beep will be heard. If it is not heard, check
the connections.
beep will be heard. If it is not heard, check
the connections.
Important:
L
For information on connecting the
handset to a PC, refer to the included
“Installation Guide for USB GEAR”.
handset to a PC, refer to the included
“Installation Guide for USB GEAR”.
Note:
L
Never install telephone wiring during a
lightning storm.
lightning storm.
L
The AC adaptor must remain connected
at all times. (It is normal for the adaptor to
feel warm during use.)
at all times. (It is normal for the adaptor to
feel warm during use.)
L
The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight
of the adaptor may cause it to become
disconnected.
disconnected.
Location
L
For maximum distance and noise-free
operation, place your base unit:
– away from electrical appliances such as
operation, place your base unit:
– away from electrical appliances such as
TVs, radios, personal computers or
other phones.
other phones.
– in a convenient, high and central
location.
Battery installation
Insert the batteries negative (T) terminal
first. Close the handset cover.
first. Close the handset cover.
Note:
L
Use only rechargeable batteries (page 6).
Battery replacement
Important:
L
We recommend the use of Panasonic
rechargeable batteries noted on page 6.
rechargeable batteries noted on page 6.
Press the notch on the handset cover firmly
and slide it in the direction of the arrow.
and slide it in the direction of the arrow.
Hooks
Use only the included AC adaptor
and telephone line cord.
and telephone line cord.
(220
–
240 V, 50 Hz)
To telephone
network
network
TCD820FX(e-e).book Page 12 Tuesday, September 13, 2005 9:10 AM