Panasonic kx-tcd224e User Manual

Page of 68
Base Unit Settings
31
Helpline Tel. No.: U.K. 08700 100 076  R.O.I. 01289 8333
Ringer setup
Ringer volume
1
Press {j/OK}.
2
Select “Base Unit Setup”, then 
press {>}.
3
Enter “0000” (default base unit PIN).
L
If you changed the PIN, enter it (page 
33).
4
Select “Ringer Setup”, then press 
{>}
.
5
Select “Ringer Volume”, then press 
{>}
.
6
Press {e} or {v} repeatedly to select 
the desired volume.
7
Press {>}.
8
Press {ih}.
Night mode
Night mode allows you to select a block of 
time during which the base unit will not ring 
for outside calls. This feature is useful for 
times when you do not want to be disturbed, 
for example, while sleeping. Night mode can 
be set independently for the handset (page 
26
) and the base unit.
Set the date and time beforehand (page 12).
Note:
L
When the message alert feature is on and 
new messages are recorded, the base 
unit will beep even if the night mode 
setting is on (KX-TCD220 only).
Setting the start and end time for night 
mode
1
Press {j/OK}.
2
Select “Base Unit Setup”, then 
press {>}.
3
Enter “0000” (default base unit PIN).
L
If you changed the PIN, enter it (page 
33)
.
4
Select “Ringer Setup”, then press 
{>}
.
5
Select “Night Mode”, then press {>}.
6
Select “Start/End”, then press {>}.
7
Enter the desired hour and minute you 
wish to start this feature by selecting 2 
digits for each.
L
If you use 12-hour time entry, select 
“AM” or “PM” by pressing {*} 
repeatedly before entering the time.
8
Enter the desired hour and minute you 
wish to end this feature by selecting 2 
digits for each.
L
If you use 12-hour time entry, select 
“AM” or “PM” by pressing {*} 
repeatedly before entering the time.
9
Press {j/OK}.
10
Press {ih}.
Turning night mode on/off
1
Press {j/OK}.
2
Select “Base Unit Setup”, then 
press {>}.
3
Enter “0000” (default base unit PIN).
L
If you changed the PIN, enter it (page 
33)
.
4
Select “Ringer Setup”, then press 
{>}
.
5
Select “Night Mode”, then press {>}.
6
Select “On/Off”, then press {>}.
7
Select “On” or “Off”, then press {>}.
8
Press {ih}.
Setting the ring delay for night mode
This setting allows the base unit to ring 
during night mode if the caller waits long 
enough. After the selected amount of time 
passes, the base unit will ring, useful when 
someone urgently needs to speak with you.
TCD210220E(e-e).book  Page 31  Tuesday, January 18, 2005  9:44 AM