Panasonic kx-tcd223e User Manual

Page of 68
Multi-unit Operation
54
Helpline Tel. No.: U.K. 08700 100 076  R.O.I. 01289 8333
Cancelling a base unit
A handset can be registered to a maximum 
of 4 base units. A handset can cancel a base 
unit that it is registered to. This allows the 
handset to “forget” the base unit.
1
Press {j/OK}.
2
Select “Handset Setup”, then press 
{>}
.
3
Select “Registration”, then press 
{>}
.
4
Enter “335”.
5
Select “Cancel Base”, then press 
{>}
.
6
Enter “0000” (default handset PIN).
L
If you changed the PIN, enter it (page 
28).
7
Select the base unit(s) you want to 
cancel, by pressing the desired base unit 
number.
L
The selected base unit number(s) will 
flash.
L
To cancel a selected base unit 
number, press the number again. The 
number will stop flashing.
8
Press {j/OK}.
9
Select “Yes”, then press {>}.
10
Press {ih}.
Note:
L
To register the handset to another base 
unit or to the same base unit again, see 
manual registration (page 53).
Increasing the range of the base 
unit
You can increase the range of the base unit 
by using a DECT repeater. Please use only 
the Panasonic DECT repeater noted on 
page 6. Consult your Panasonic dealer for 
details.
Important:
L
Before registering the repeater to this 
base unit, you must turn the repeater 
mode on.
Turning the repeater mode on/off
1
Press {j/OK}.
2
Select “Base Unit Setup”, then 
press {>}.
3
Enter “0000” (default base unit PIN).
L
If you changed the PIN, enter it (page 
33)
.
4
Select “Other Options”, then press 
{>}
.
5
Select “Repeater Mode”, then press 
{>}
.
6
Select “On” or “Off”, then press {>}.
7
Press {ih}.
Note:
L
After turning repeater mode on/off, you 
will not be able to make or receive calls for 
a few moments.
L
While the repeater mode is turned on, 
audible call announcements may not be 
heard (KX-TCD220 only).
Intercom between 
handsets
Intercom calls can be made between 
handsets in the same radio cell, but not 
between handsets in different radio cells.
Example: When handset 1 calls handset 2
1
Handset 1:
Press {INT} and {2} (desired handset 
number).
2
Handset 2:
Press {C} or {s} to answer.
3
When finished talking, press {ih}.
TCD210220E(e-e).book  Page 54  Tuesday, January 18, 2005  9:44 AM