Panasonic KX-TD500 User Manual
General Features
Features Guide
111
Walking Station
Description
Used to move an extension to a new location without re-programming. Extension data such as
extension number, One-Touch dialing memory remain the same after the re-location of the
extension.
extension number, One-Touch dialing memory remain the same after the re-location of the
extension.
Conditions
•
The telephone type (PT, SLT, OPX) must be the same at the source and destination.
•
Walking Station is not available in the following cases:
– If the extension is connected to a DHLC card (KX-TD50170).
– If the extension is connected to a HLC card (KX-T96170) in parallel.
– If the extension is in hands-free mode.
– If the extension is connected to a DHLC card (KX-TD50170).
– If the extension is connected to a HLC card (KX-T96170) in parallel.
– If the extension is in hands-free mode.
•
The status of the port must be INS (In-Service) at the source and destination.
•
When the destination extension is in one of the following states,
is
shown on the display.
– Off-hook, incoming call
– Call Hold
– All buttons on PT are in use
– Off-hook, incoming call
– Call Hold
– All buttons on PT are in use
•
When you reset the system during this process, the setting is canceled.
Programming Guide References
•
2.3 Numbering Plan
–
Walking Station
Features Guide References
None
User Manual References
•
4.3.85 Walking Station
Try Again