Panasonic kx-tcd961 User Manual
42
Remote Operation from a Touch Tone Phone
Setting the Remote Code
The remote code prevents unauthorised people from accessing your unit and listening to your
messages. Choose any 3-digit number (000–999). The remote code is not preset.
Make sure that the power is ON (p. 14) and the unit is in the stand-by mode.
messages. Choose any 3-digit number (000–999). The remote code is not preset.
Make sure that the power is ON (p. 14) and the unit is in the stand-by mode.
Cancelling the remote operation
You can prohibit anyone from accessing to your
unit and listening to your recorded messages
remotely. Erase the remote code in the following
way. After this programming, you cannot use the
remote operation functions (p. 43–45).
unit and listening to your recorded messages
remotely. Erase the remote code in the following
way. After this programming, you cannot use the
remote operation functions (p. 43–45).
1
Press
then
.
2
Press
.
•
“
” is displayed on the handset.
•
“P” is displayed on the base unit.
3
Press
.
4
Press
.
•
The display goes out.
5
Press
.
•
To cancel, reprogram a new remote code.
PROG
1
INT
PROG
1
Press
then
.
2
Press
.
•
“
” is displayed on the handset.
•
“P” is displayed on the base unit.
3
Press
.
4
Enter a remote code using a
3-digit number (000–999).
3-digit number (000–999).
•
The entered number is displayed
on the base unit.
on the base unit.
5
Press
.
•
A confirmation tone sounds.
•
To change the remote code, repeat from
step1.
step1.
•
If 6 beeps sound in step 5, a 3-digit number
was not entered. Start again from step 1 and
enter a 3-digit number.
was not entered. Start again from step 1 and
enter a 3-digit number.
•
If a remote code is not programmed, you
cannot use the unit remotely.
cannot use the unit remotely.
PROG
1
INT
PROG
KX-TCD961EB.4(38~46) 99.9.27 7:33 PM Page 42